OID reference
1.3.6.1.4.1.272.4.46.12.2
This attribute defines the maximum time a bridge auto-configuration setup may take. After this timeout has expired, any auto-configuration setup will be aborted, regardless of current state. In this case, artemBridgePeerConfigSetupResult will be set to 'timeout'.
Identification
{1 3 6 1 4 1 272 4 46 12 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.272.4.46.12.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
wlanBridgeConfigSetupTimeout OBJECT-TYPE
SYNTAX INTEGER (10..600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute defines the maximum time a bridge
auto-configuration setup may take. After this timeout
has expired, any auto-configuration setup will be aborted,
regardless of current state.
In this case, artemBridgePeerConfigSetupResult
will be set to 'timeout'."
DEFVAL { 300 }
::= { wlanBridge 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This attribute defines the maximum time a bridge auto-configuration setup may take. After this timeout has expired, any auto-configuration setup will be aborted, regardless of current state. In this case, artemBridgePeerConfigSetupResult will be set to 'timeout'.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: wlanBridgeConfigSetupTimeout
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wlanBridgeConfigSetupTimeout",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"10",
".",
".",
"600",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute defines the maximum time a bridge auto-configuration setup may take. After this timeout has expired, any auto-configuration setup will be aborted, regardless of current state. In this case, artemBridgePeerConfigSetupResult will be set to 'timeout'.\"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"wlanBridge",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
10,
600
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute defines the maximum time a bridge auto-configuration setup may take. After this timeout has expired, any auto-configuration setup will be aborted, regardless of current state. In this case, artemBridgePeerConfigSetupResult will be set to 'timeout'."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Vendor MIB copy from the Observium Community archive.
Module: BIANCA-BRICK-WIRELESS-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus'], 'BINTEC-MIB': ['bibo', 'wlan', 'BitValue', 'Date', 'HexValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'RFC1155-SMI': ['IpAddress', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.46.12.1 | wlanBridgeConfigScanTimeout | 0 | 0 |