Specifies the NAT category according RFC 3489 and 5389 to be applied for UDP traffic matching with this entry.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.272.4.5.61.1.16
Specifies the NAT category according RFC 3489 and 5389 to be applied for UDP traffic matching with this entry.
Identification
{1 3 6 1 4 1 272 4 5 61 1 16}
| Value | Name |
|---|---|
| 1 | full-cone |
| 2 | restricted-cone |
| 3 | port-restricted-cone |
| 4 | symmetric |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In BINTEC-IPEXT-MIB, the row index consists of these components in order:
ipNatOutOperIfIndex (INTEGER): one numeric subidentifier for the non-negative value.ipNatOutOperIntAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.ipNatOutOperExtAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.272.4.5.61.1.16.<ipNatOutOperIfIndex>.<ipNatOutOperIntAddr: four octets>.<ipNatOutOperExtAddr: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.272.4.5.61.1.16
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ipNatOutOperNatCategory OBJECT-TYPE
SYNTAX INTEGER {
full-cone(1),
restricted-cone(2),
port-restricted-cone(3),
symmetric(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the NAT category according RFC 3489 and 5389
to be applied for UDP traffic matching with this entry."
DEFVAL { symmetric }
::= { ipNatOutOperEntry 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies the NAT category according RFC 3489 and 5389 to be applied for UDP traffic matching with this entry.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ipNatOutOperNatCategory
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipNatOutOperNatCategory",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"full-cone",
"(",
"1",
")",
",",
"restricted-cone",
"(",
"2",
")",
",",
"port-restricted-cone",
"(",
"3",
")",
",",
"symmetric",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the NAT category according RFC 3489 and 5389 to be applied for UDP traffic matching with this entry.\"",
"DEFVAL",
"{",
"symmetric",
"}",
"::=",
"{",
"ipNatOutOperEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"full-cone",
1
],
[
"restricted-cone",
2
],
[
"port-restricted-cone",
3
],
[
"symmetric",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the NAT category according RFC 3489 and 5389 to be applied for UDP traffic matching with this entry."
],
null,
null,
null,
[
"DEFVAL",
"symmetric"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: BINTEC-IPEXT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TimeStamp', 'TruthValue', 'TruthValue'], 'BINTEC-MIB': ['biboip', 'Date', 'BitValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Counter64', 'TimeTicks'], 'RFC1155-SMI': ['enterprises', 'IpAddress', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.5.61.1.1 | ipNatOutOperIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.2 | ipNatOutOperProtocol | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.3 | ipNatOutOperRemoteAddr | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.4 | ipNatOutOperRemoteMask | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.5 | ipNatOutOperExtAddr | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.6 | ipNatOutOperRemotePort | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.7 | ipNatOutOperRemotePortRange | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.8 | ipNatOutOperIntAddr | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.9 | ipNatOutOperIntMask | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.10 | ipNatOutOperIntPort | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.11 | ipNatOutOperExtPort | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.12 | ipNatOutOperExtMask | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.13 | ipNatOutOperTimeout | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.14 | ipNatOutOperType | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.15 | ipNatOutOperParent | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.17 | ipNatOutOperIntPortRange | 0 | 0 | |
| 1.3.6.1.4.1.272.4.5.61.1.18 | ipNatOutOperExtPortRange | 0 | 0 |