use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.26
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
Identification
{1 3 6 1 4 1 27514 1 1 10 2 27 1 1 2 1 26}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
qtechPimInterfaceEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command."
DEFVAL{disabled}
::= { qtechPimInterfaceEntry 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: qtechPimInterfaceEnabled
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qtechPimInterfaceEnabled",
"OBJECT-TYPE",
"SYNTAX",
"EnabledStatus",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"qtechPimInterfaceEntry",
"26",
"}"
],
"syntax_tree": [
[
"row",
"EnabledStatus"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: QTECH-PIM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'QTECH-SMI': ['qtechMgmt'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'IPMROUTE-STD-MIB': ['ipMRouteGroup', 'ipMRouteSource', 'ipMRouteSourceMask', 'ipMRouteNextHopGroup', 'ipMRouteNextHopSource', 'ipMRouteNextHopSourceMask', 'ipMRouteNextHopIfIndex', 'ipMRouteNextHopAddress']}Registration