OID reference
1.3.6.1.4.1.2769.10.1.2
systemSNMPsave is used to write all changes made via SNMP into the flash disk. If set to 2 the save operation is triggered. After successfull write it is reset to 1 (default value).
Identification
{1 3 6 1 4 1 2769 10 1 2}
| Value | Name |
|---|---|
| 1 | default |
| 2 | save |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2769.10.1.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
systemSNMPsave OBJECT-TYPE
SYNTAX INTEGER {
default(1),
save(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"systemSNMPsave is used to write all changes
made via SNMP into the flash disk. If set to 2 the
save operation is triggered. After successfull write
it is reset to 1 (default value)."
::= { rmssystem 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
systemSNMPsave is used to write all changes made via SNMP into the flash disk. If set to 2 the save operation is triggered. After successfull write it is reset to 1 (default value).
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: systemSNMPsave
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"systemSNMPsave",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"default",
"(",
"1",
")",
",",
"save",
"(",
"2",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"systemSNMPsave is used to write all changes made via SNMP into the flash disk. If set to 2 the save operation is triggered. After successfull write it is reset to 1 (default value).\"",
"::=",
"{",
"rmssystem",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"default",
1
],
[
"save",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"systemSNMPsave is used to write all changes made via SNMP into the flash disk. If set to 2 the save operation is triggered. After successfull write it is reset to 1 (default value)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: RMS-MIB
See published definition above
{'RFC1155-SMI': ['enterprises', 'OBJECT-TYPE', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2769.10.1.1 | systemVersion | 0 | 0 | |
| 1.3.6.1.4.1.2769.10.1.3 | systemMsgToSyslog | 0 | 0 | |
| 1.3.6.1.4.1.2769.10.1.4 | systemReset | 0 | 0 | |
| 1.3.6.1.4.1.2769.10.1.5 | systemSNMPaccess | 0 | 0 |