Status in source: current.
Names: flhOperStatus
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"flhOperStatus",
"OBJECT-TYPE",
"SYNTAX",
"FlashOperationStatus",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The status of the specified operation can be one of the following. opInProgress(1) : the operation is in process. opSuccess(2) : the operation has been completed successfully. opInvalid(3) : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol(4) :invalid protocol is specified opInvalidSourceName(5) :invalid source file name is specified. opInvalidDestName(6) :invalid target name is specified. opInvalidServerAddress(7) :invalid server address is specified opDeviceBusy(8) :the device is in use and locked by another process opDeviceOpenError(9) :invalid device name is specified. opDeviceError(10) : device read, write or erase error opDeviceNotProgrammable(11) :device isread-only but a write or erase operation was specified. opDeviceFull(12) : device is filled to capacity opFileOpenError(13) :invalid file name; file not found in partition opFileTransferError(14) :file transfer was unsuccessful opFileChecksumError(15) :file checksum in Flash is invalid opNoMemory(16) :system is running in low on memory opUnknownFailure(19) :failure which is unknown opDeleteFileOpenError(20) :file is in used by another process opDeleteInvalidDevice(21) :invalid device name is specified opDeleteInvalidFunction(22) :deleted operation is unsupported by the device. opDeleteOperationError(23) :operation is in a low error opDeleteInvalidFileName(24) :invalid file name is specified pDeleteDeviceBusy(25) :the device is in use and locked by another process. opDeleteParaError(26) :the parameters are invalid opDeleteInvalidPath(27) :the file path is invalid.\"",
"::=",
"{",
"flhOpEntry",
"9",
"}"
],
"syntax_tree": [
[
"row",
"FlashOperationStatus"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The status of the specified operation can be one of the following. opInProgress(1) : the operation is in process. opSuccess(2) : the operation has been completed successfully. opInvalid(3) : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol(4) :invalid protocol is specified opInvalidSourceName(5) :invalid source file name is specified. opInvalidDestName(6) :invalid target name is specified. opInvalidServerAddress(7) :invalid server address is specified opDeviceBusy(8) :the device is in use and locked by another process opDeviceOpenError(9) :invalid device name is specified. opDeviceError(10) : device read, write or erase error opDeviceNotProgrammable(11) :device isread-only but a write or erase operation was specified. opDeviceFull(12) : device is filled to capacity opFileOpenError(13) :invalid file name; file not found in partition opFileTransferError(14) :file transfer was unsuccessful opFileChecksumError(15) :file checksum in Flash is invalid opNoMemory(16) :system is running in low on memory opUnknownFailure(19) :failure which is unknown opDeleteFileOpenError(20) :file is in used by another process opDeleteInvalidDevice(21) :invalid device name is specified opDeleteInvalidFunction(22) :deleted operation is unsupported by the device. opDeleteOperationError(23) :operation is in a low error opDeleteInvalidFileName(24) :invalid file name is specified pDeleteDeviceBusy(25) :the device is in use and locked by another process. opDeleteParaError(26) :the parameters are invalid opDeleteInvalidPath(27) :the file path is invalid."
],
null,
null,
null,
null
]
}
- FS.COM MIB copies (LibreNMS/Observium Community)
· Publisher's source file: SWITCH
Vendor MIB copy from the LibreNMS archive.
FS.COM support.
Module: SWITCH
See published definition above
Module imports
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
· Download SWITCH
Related source files and packages:
- FS.COM MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
FS.COM support.
Module: FS-SWITCH-MIB
Same published definition
Module imports
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
· Download FS-SWITCH-MIB
Related source files and packages: