OID reference
1.3.6.1.4.1.27975.52.2.4.1.4
The do1q-tunnel allow vlan id to set.vlan id range 1~4094. This node is only use for set. The get value is always 0. Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface.
Identification
{1 3 6 1 4 1 27975 52 2 4 1 4}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SWITCH, the row index qinqIfDot1qTunnelAllowVlanIfIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.27975.52.2.4.1.4.<qinqIfDot1qTunnelAllowVlanIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: qinqIfDot1qTunnelAllowVlanIfIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.27975.52.2.4.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
qinqIfDot1qTunnelAllowVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The do1q-tunnel allow vlan id to set.vlan id range 1~4094.
This node is only use for set. The get value is always 0.
Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface."
::= { qinqIfDot1qTunnelAllowVlanEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The do1q-tunnel allow vlan id to set.vlan id range 1~4094. This node is only use for set. The get value is always 0. Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface.
FS.COM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: qinqIfDot1qTunnelAllowVlanId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qinqIfDot1qTunnelAllowVlanId",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"4094",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The do1q-tunnel allow vlan id to set.vlan id range 1~4094. This node is only use for set. The get value is always 0. Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface.\"",
"::=",
"{",
"qinqIfDot1qTunnelAllowVlanEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
4094
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The do1q-tunnel allow vlan id to set.vlan id range 1~4094. This node is only use for set. The get value is always 0. Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: SWITCH
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-SWITCH-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27975.52.2.4.1.1 | qinqIfDot1qTunnelAllowVlanIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.27975.52.2.4.1.2 | qinqIfDot1qTunnelAllowVlanIdList | 0 | 0 | |
| 1.3.6.1.4.1.27975.52.2.4.1.3 | qinqIfDot1qTunnelAllowType | 0 | 0 | |
| 1.3.6.1.4.1.27975.52.2.4.1.5 | qinqIfDot1qTunnelAllowRowstatus | 0 | 0 |