Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dtmIfLinkClass",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"normal",
"(",
"1",
")",
",",
"persistent",
"(",
"2",
")",
",",
"nailed",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The link class controls the behavior of a link when a failure is detected on the link or on the node connected to the remote end of the link. The link class decides which values the dtmLinkStateNodeStatus object can take. A link is monitored with the following mechanisms: - The underlying trunk interface will detect when the signal on the receiving interface disappears or is impossible to use due to errors. This is called a Signal Failure. - The communication with the node at the remote end of the link is monitored by periodically sending messages, and expecting responses. If no response is received within a reasonable time, a failure is assumed. This is called a Supervision Failure. The error detection mechanisms can detect failures in one or both directions of a bi-directional link. If a failure is detected in only one direction of a bi-directional link and there is another fully working link in the opposite direction, the remaining working links will all have status `up'. The link classes are: normal(1) If either a Signal Failure or Supervision Failure is detected on the link, the link is considered as `down' and its entry is removed from the dtmLinkStateTable. persistent(2) If a Signal Failure is detected on the link, the link is considered as `down' and its entry is removed from the dtmLinkStateTable. If a Supervision Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `noControl'. nailed(3) If a Signal Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `downKeep'. If a Supervision Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `noControl'. \"",
"DEFVAL",
"{",
"normal",
"}",
"::=",
"{",
"dtmIfEntry",
"24",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"normal",
1
],
[
"persistent",
2
],
[
"nailed",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The link class controls the behavior of a link when a failure is detected on the link or on the node connected to the remote end of the link. The link class decides which values the dtmLinkStateNodeStatus object can take. A link is monitored with the following mechanisms: - The underlying trunk interface will detect when the signal on the receiving interface disappears or is impossible to use due to errors. This is called a Signal Failure. - The communication with the node at the remote end of the link is monitored by periodically sending messages, and expecting responses. If no response is received within a reasonable time, a failure is assumed. This is called a Supervision Failure. The error detection mechanisms can detect failures in one or both directions of a bi-directional link. If a failure is detected in only one direction of a bi-directional link and there is another fully working link in the opposite direction, the remaining working links will all have status `up'. The link classes are: normal(1) If either a Signal Failure or Supervision Failure is detected on the link, the link is considered as `down' and its entry is removed from the dtmLinkStateTable. persistent(2) If a Signal Failure is detected on the link, the link is considered as `down' and its entry is removed from the dtmLinkStateTable. If a Supervision Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `noControl'. nailed(3) If a Signal Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `downKeep'. If a Supervision Failure is detected on the link, the object dtmLinkStateIfNodeStatus for the link is assigned `noControl'."
],
null,
null,
null,
[
"DEFVAL",
"normal"
]
]
}