Status in source: current.
Names: fs2544ContextTraceOption
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fs2544ContextTraceOption",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"4294967295",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable the trace statements in RFC2544 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byte integer, represents a level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Start and Shutdown Traces 1 - Configuration related traces 2 - Y1731 interface related messages 3 - Traces related to All Resources except Buffers 4 - Timer start, stop and expiry traces 5 - Critical Traces 6 - BenchMark test traces 7 - Session record traces 8 - All Failure traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Start-Shutdown and Configuration traces are generated. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set, the user has to enter the value 3. By default critical trace is enabled.\"",
"DEFVAL",
"{",
"'",
"00000020",
"'",
"H",
"}",
"::=",
"{",
"fs2544ContextEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
4294967295
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable the trace statements in RFC2544 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byte integer, represents a level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Start and Shutdown Traces 1 - Configuration related traces 2 - Y1731 interface related messages 3 - Traces related to All Resources except Buffers 4 - Timer start, stop and expiry traces 5 - Critical Traces 6 - BenchMark test traces 7 - Session record traces 8 - All Failure traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Start-Shutdown and Configuration traces are generated. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set, the user has to enter the value 3. By default critical trace is enabled."
],
null,
null,
null,
[
"DEFVAL",
"'00000020'H"
]
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: ARICENT-RFC2544-MIB
See published definition above
Module imports
{'SNMPv2-TC': ['RowStatus', 'TimeStamp', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'enterprises', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY'], 'IEEE8021-TC-MIB': ['IEEE8021PriorityCodePoint']}
Related source files and packages: