Status in source: current.
Names: fs6374CmbLMDMPaddingSize
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fs6374CmbLMDMPaddingSize",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"9000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the size of the pattern to be included in the Padding TLV of Combined LMDM message. This configuration is applicable only for Non-dyadic Combined LMDM Measurement. Maximum frame size suggested by RFC6374 for Padding TLV is 9000 bytes. Based on the interface MTU, the maximum frame size of Combined LMDM padding TLV size can be chosen. The TLV value field in PaddingTLV will have maximum of 255 bytes. When the fs6374CmbLMDMPaddingSize is configured with more than 255 bytes then total size will be split across multiple TLVs. Default value of padding pattern is updated as zero for the size specified by this object. If the object is configured with the value as `zero` then padding TLV will not be included. There are two types of padding TLV are specified in RFC6374 section 3.5 but the padding TLV type 0 - Copy in response is supported. This object cannot be modified when fs6374CmbLMDMTransmitStatus is `notReady`.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"fs6374ParamsConfigTableEntry",
"22",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
9000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the size of the pattern to be included in the Padding TLV of Combined LMDM message. This configuration is applicable only for Non-dyadic Combined LMDM Measurement. Maximum frame size suggested by RFC6374 for Padding TLV is 9000 bytes. Based on the interface MTU, the maximum frame size of Combined LMDM padding TLV size can be chosen. The TLV value field in PaddingTLV will have maximum of 255 bytes. When the fs6374CmbLMDMPaddingSize is configured with more than 255 bytes then total size will be split across multiple TLVs. Default value of padding pattern is updated as zero for the size specified by this object. If the object is configured with the value as `zero` then padding TLV will not be included. There are two types of padding TLV are specified in RFC6374 section 3.5 but the padding TLV type 0 - Copy in response is supported. This object cannot be modified when fs6374CmbLMDMTransmitStatus is `notReady`."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}