Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMIEcfmExtMepTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"FsMIEcfmExtMepEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (802.1ag clause 3.18). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The Transmit Loopback table. Entries in this table are created/removed at the same time than entries in the MEP table are created/removed. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it should transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Wait for fsMIEcfmExtMepTransmitLbmStatus value to be 'ready'. To do this do this sequence: a. an SNMP GET for both SnmpSetSerialNo and fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP PDU). b. Check if value for fsMIEcfmExtMepTransmitLbmStatus is 'ready' - if not, wait x seconds, go to step a above. - if yes, save the value of SnmpSetSerialNo and go to step 2) below 2) Change fsMIEcfmExtMepTransmitLbmStatus value from 'ready' to 'notReady' to ensure no other management entity will use the service. In order to not disturb a possible other NMS do this by sending an SNMP SET for both SnmpSetSerialNo and fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP PDU, and make sure SNmpSetSerialNo is the first varBind). For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures that two cooperating NMSes will not step on each others toes. 3) Setup the different data to be sent (number of messages, optional TLVs,...). 4) Record the current values of fsMIEcfmExtMepLbrIn, fsMIEcfmExtMepLbrInOutOfOrder, and fsMIEcfmExtMepLbrBadMsdu. 6) Change fsMIEcfmExtMepTransmitLbmStatus value from 'notReady' to 'transmit' to initiate transmission of Loopback messages. 7) Check the value of fsMIEcfmExtMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) Monitor the value of fsMIEcfmExtMepTransmitLbmMessages. When it reaches 0, the last LBM has been transmitted. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) Compare fsMIEcfmExtMepLbrIn, fsMIEcfmExtMepLbrInOutOfOrder, and fsMIEcfmExtMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. 10) Change the fsMIEcfmExtMepTransmitLbmStatus value back to 'ready' to allow other management entities to use the table. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above. Upon successfully initiating the transmission, the variables fsMIEcfmExtMepTransmitLtmSeqNumber and fsMIEcfmExtMepTransmitLtmEgressIdentifier return the information required to recover the results of the LTM from the fsMIEcfmLtrTable. \"",
"REFERENCE",
"\"802.1ag clauses 12.14.7 and 19.2\"",
"::=",
"{",
"fsMIEcfmExtContext",
"3",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"FsMIEcfmExtMepEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (802.1ag clause 3.18). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The Transmit Loopback table. Entries in this table are created/removed at the same time than entries in the MEP table are created/removed. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it should transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Wait for fsMIEcfmExtMepTransmitLbmStatus value to be 'ready'. To do this do this sequence: a. an SNMP GET for both SnmpSetSerialNo and fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP PDU). b. Check if value for fsMIEcfmExtMepTransmitLbmStatus is 'ready' - if not, wait x seconds, go to step a above. - if yes, save the value of SnmpSetSerialNo and go to step 2) below 2) Change fsMIEcfmExtMepTransmitLbmStatus value from 'ready' to 'notReady' to ensure no other management entity will use the service. In order to not disturb a possible other NMS do this by sending an SNMP SET for both SnmpSetSerialNo and fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP PDU, and make sure SNmpSetSerialNo is the first varBind). For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures that two cooperating NMSes will not step on each others toes. 3) Setup the different data to be sent (number of messages, optional TLVs,...). 4) Record the current values of fsMIEcfmExtMepLbrIn, fsMIEcfmExtMepLbrInOutOfOrder, and fsMIEcfmExtMepLbrBadMsdu. 6) Change fsMIEcfmExtMepTransmitLbmStatus value from 'notReady' to 'transmit' to initiate transmission of Loopback messages. 7) Check the value of fsMIEcfmExtMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) Monitor the value of fsMIEcfmExtMepTransmitLbmMessages. When it reaches 0, the last LBM has been transmitted. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) Compare fsMIEcfmExtMepLbrIn, fsMIEcfmExtMepLbrInOutOfOrder, and fsMIEcfmExtMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. 10) Change the fsMIEcfmExtMepTransmitLbmStatus value back to 'ready' to allow other management entities to use the table. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above. Upon successfully initiating the transmission, the variables fsMIEcfmExtMepTransmitLtmSeqNumber and fsMIEcfmExtMepTransmitLtmEgressIdentifier return the information required to recover the results of the LTM from the fsMIEcfmLtrTable."
],
[
"REFERENCE",
"802.1ag clauses 12.14.7 and 19.2"
],
null,
null,
null
]
}