Status in source: current.
Names: fsDcbxGlobalTraceLevel
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsDcbxGlobalTraceLevel",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Redundancy Traces 7 - MBSM Traces 8 - Control Plane Traces. The remaining bits are unused. Combinations of levels are also allowed. For example if the bits 1 and 2 are set, then the trace statements related to management and DCBX State Machine will be printed. By default 'Failure Traces' are enabled. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 1 and 2 are set then user has to set the value 3.\"",
"DEFVAL",
"{",
"16",
"}",
"::=",
"{",
"fsDCBXScalars",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Redundancy Traces 7 - MBSM Traces 8 - Control Plane Traces. The remaining bits are unused. Combinations of levels are also allowed. For example if the bits 1 and 2 are set, then the trace statements related to management and DCBX State Machine will be printed. By default 'Failure Traces' are enabled. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 1 and 2 are set then user has to set the value 3."
],
null,
null,
null,
[
"DEFVAL",
16
]
]
}