Status in source: current.
Names: fsCnXGlobalTraceLevel
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsCnXGlobalTraceLevel",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable Trace Statements in CN Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - CND State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Redundancy Traces 6 - Failure Traces 7 - Control Plane Trace The remaining bits are unused. Combinations of levels are also allowed. For example if the bits 1 and 2 are set, then the trace statements related to management and CND State Machine will be printed. By default 'Failure Traces' are enabled. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 1 and 2 are set then user has to set the value 3.\"",
"DEFVAL",
"{",
"32",
"}",
"::=",
"{",
"fsCnXGlobalEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable Trace Statements in CN Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - CND State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Redundancy Traces 6 - Failure Traces 7 - Control Plane Trace The remaining bits are unused. Combinations of levels are also allowed. For example if the bits 1 and 2 are set, then the trace statements related to management and CND State Machine will be printed. By default 'Failure Traces' are enabled. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 1 and 2 are set then user has to set the value 3."
],
null,
null,
null,
[
"DEFVAL",
32
]
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: ARICENT-CN-MIB
See published definition above
Module imports
{'SNMPv2-TC': ['TruthValue', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'Counter32', 'NOTIFICATION-TYPE'], 'IEEE8021-CN-MIB': ['ieee8021CnPortPriEntry', 'ieee8021CnCpIdentifier', 'ieee8021CnGlobalEntry', 'Ieee8021CnDefenseMode'], 'IEEE8021-TC-MIB': ['IEEE8021PriorityValue']}
Related source files and packages:
- Belden, GarrettCom and Hirschmann IT official standalone MIBs
· Publisher's source file: fscn.mib
Module: ARICENT-CN-MIB
Same published definition
Module imports
{'SNMPv2-TC': ['TruthValue', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'Counter32', 'NOTIFICATION-TYPE'], 'IEEE8021-CN-MIB': ['ieee8021CnPortPriEntry', 'ieee8021CnCpIdentifier', 'ieee8021CnGlobalEntry', 'Ieee8021CnDefenseMode'], 'IEEE8021-TC-MIB': ['IEEE8021PriorityValue']}
Related source files and packages: