OID reference
1.3.6.1.4.1.29601.2.7.1.2.4.1.110
Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval.
Identification
{1 3 6 1 4 1 29601 2 7 1 2 4 1 110}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.29601.2.7.1.2.4.1.110
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
fsMIY1731Mep1DmTransInterval OBJECT-TYPE
SYNTAX TimeInterval(0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.
The value '0' indicates One-way Delay Variation measurement cannot take place.
The value should be greater than the DM Interval.
"
DEFVAL { 0 }
::= { fsMIY1731MepEntry 110 }fsMIY1731Mep1DmTransInterval OBJECT-TYPE
SYNTAX TimeInterval(0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.
The value '0' indicates One-way Delay Variation measurement cannot take place.
The value should be greater than the DM Interval.
"
DEFVAL { 0 }
::= { fsMIY1731MepEntry 110 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval.
Belden, GarrettCom and Hirschmann IT official standalone MIBs
Description 2
This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsMIY1731Mep1DmTransInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMIY1731Mep1DmTransInterval",
"OBJECT-TYPE",
"SYNTAX",
"TimeInterval",
"(",
"0",
".",
".",
"1500",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval. \"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"fsMIY1731MepEntry",
"110",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"TimeInterval",
[
"integerSubType",
[
[
0,
1500
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: ARICENT-ECFM-Y1731-MI-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'ECFM-MIB': ['Dot1agCfmMepId', 'Dot1agCfmTransmitStatus', 'Dot1agCfmMDLevelOrNone', 'Dot1agCfmMepIdOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'TimeInterval', 'TimeStamp', 'MacAddress', 'RowStatus', 'RowPointer'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32', 'Unsigned32']}Related source files and packages:
Status in source: current.
Names: fsMIY1731Mep1DmTransInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMIY1731Mep1DmTransInterval",
"OBJECT-TYPE",
"SYNTAX",
"TimeInterval",
"(",
"0",
".",
".",
"1500",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval. \"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"fsMIY1731MepEntry",
"110",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"TimeInterval",
[
"integerSubType",
[
[
0,
1500
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ARICENT-ECFM-Y1731-MI-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'TimeInterval', 'TimeStamp', 'MacAddress', 'RowStatus', 'RowPointer'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanId'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'Dot1agCfmMDLevelOrNone', 'Dot1agCfmMepIdOrZero']}Related source files and packages:
Registration