OID reference
1.3.6.1.4.1.29601.2.71.2.1.1.21
This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control protocol will be referred from UNI table. If this option is set to disable, tunnel status for Layer 2 control protocols which operate over a service vlan will be …
Identification
{1 3 6 1 4 1 29601 2 71 2 1 1 21}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
fsUniL2CPOverrideOption OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether override option is enabled or disabled on
the Port.
If this option is set to enable, tunnel status for all the Layer 2 control
protocol will be referred from UNI table.
If this option is set to disable, tunnel status for Layer 2 control
protocols which operate over a service vlan will be referred from EVC table."
DEFVAL {2}
::= { fsUniEntry 21 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control protocol will be referred from UNI table. If this option is set to disable, tunnel status for Layer 2 control protocols which operate over a service vlan will be referred from EVC table.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsUniL2CPOverrideOption
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsUniL2CPOverrideOption",
"OBJECT-TYPE",
"SYNTAX",
"EnabledStatus",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control protocol will be referred from UNI table. If this option is set to disable, tunnel status for Layer 2 control protocols which operate over a service vlan will be referred from EVC table.\"",
"DEFVAL",
"{",
"2",
"}",
"::=",
"{",
"fsUniEntry",
"21",
"}"
],
"syntax_tree": [
[
"row",
"EnabledStatus"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control protocol will be referred from UNI table. If this option is set to disable, tunnel status for Layer 2 control protocols which operate over a service vlan will be referred from EVC table."
],
null,
null,
null,
[
"DEFVAL",
2
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ARICENT-MEF-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString', 'TimeInterval', 'TimeStamp', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Gauge32', 'Unsigned32', 'Counter32', 'enterprises'], 'DIFFSERV-MIB': ['IndexInteger'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'ARICENT-QOS-MIB': ['MeterColorMode', 'MeterType'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'Dot1agCfmMepIdOrZero'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'ARICENT-ECFM-Y1731-MI-MIB': ['FsY1731TransmitStatus', 'FsY1731LmmInterval', 'FsY1731TimeRepresentation', 'FsY1731AvailabilityInterval', 'FsY1731AvailabilityType']}Related source files and packages:
Registration