OID reference
1.3.6.1.4.1.29601.2.72.4.1.1.5
This object is used to indicate the operation type/mode of the lockout protection group entry. If the value is set to 'enabled(1)', then no switching shall occur in the event of a fault/ac failure or force switchover. If the value is set to 'disabled(0)', then the normal switching shall occur in case of AC failure,fau…
Identification
{1 3 6 1 4 1 29601 2 72 4 1 1 5}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: fsL2VpnPwRedGroupIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.29601.2.72.4.1.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
fsL2VpnPwRedGroupLockoutProtection OBJECT-TYPE
SYNTAX INTEGER
{
disabled (0),
enabled (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to indicate the operation type/mode of the
lockout protection group entry. If the value is set to 'enabled(1)', then
no switching shall occur in the event of a fault/ac failure or force switchover.
If the value is set to 'disabled(0)', then the normal switching shall occur in
case of AC failure,fault occurence of forced switchover"
DEFVAL { disabled }
::= { fsL2VpnPwRedGroupEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is used to indicate the operation type/mode of the lockout protection group entry. If the value is set to 'enabled(1)', then no switching shall occur in the event of a fault/ac failure or force switchover. If the value is set to 'disabled(0)', then the normal switching shall occur in case of AC failure,fault occurence of forced switchover
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsL2VpnPwRedGroupLockoutProtection
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsL2VpnPwRedGroupLockoutProtection",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to indicate the operation type/mode of the lockout protection group entry. If the value is set to 'enabled(1)', then no switching shall occur in the event of a fault/ac failure or force switchover. If the value is set to 'disabled(0)', then the normal switching shall occur in case of AC failure,fault occurence of forced switchover\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"fsL2VpnPwRedGroupEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to indicate the operation type/mode of the lockout protection group entry. If the value is set to 'enabled(1)', then no switching shall occur in the event of a fault/ac failure or force switchover. If the value is set to 'disabled(0)', then the normal switching shall occur in case of AC failure,fault occurence of forced switchover"
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: Aricent-L2VPN-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'enterprises', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PW-TC-STD-MIB': ['PwIndexOrZeroType', 'PwIDType', 'PwGroupID', 'PwOperStatusTC'], 'MPLS-TC-STD-MIB': ['MplsLdpIdentifier', 'MplsLsrIdentifier'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.72.4.1.1.1 | fsL2VpnPwRedGroupIndex | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.2 | fsL2VpnPwRedGroupProtType | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.3 | fsL2VpnPwRedGroupReversionType | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.4 | fsL2VpnPwRedGroupContentionResolutionMethod | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.6 | fsL2VpnPwRedGroupMasterSlaveMode | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.7 | fsL2VpnPwRedGroupDualHomeApps | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.8 | fsL2VpnPwRedGroupName | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.9 | fsL2VpnPwRedGroupStatus | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.10 | fsL2VpnPwRedGroupOperActivePw | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.11 | fsL2VpnPwRedGroupWtrTimer | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.12 | fsL2VpnPwRedGroupAdminCmd | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.13 | fsL2VpnPwRedGroupAdminActivePw | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.14 | fsL2VpnPwRedGroupAdminCmdStatus | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.72.4.1.1.15 | fsL2VpnPwRedGroupRowStatus | 0 | 0 |