Status in source: current.
Names: fsSynceTraceOption
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsSynceTraceOption",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable governs the trace levels in the SyncE module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: Bit 0 - Init and Shutdown traces Bit 1 - Management traces Bit 2 - Data Path traces [NOT REQUIRED IN SYNCE] Bit 3 - Control Plane traces Bit 4 - Packet Dump traces Bit 5 - Traces related to all resources except buffers Bit 6 - All Failure traces Bit 7 - Buffer allocation/release traces Bit 16 - SYNCE Function Entry traces Bit 17 - SYNCE Function Exit traces Bit 18 - SYNCE Critical traces The remaining bits are unused. Combination of levels are also allowed. For example, if the bits 19 and 20 are set, then the trace statement related to discovery and remote loopback related messages will be printed. The user has to enter the corresponding integer value for the bits set. For example, if bits 8 and 9 are to be set, then user has to give the value 0x300.\"",
"DEFVAL",
"{",
"'",
"00000040",
"'",
"H",
"}",
"::=",
"{",
"fsSynceEntry",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable governs the trace levels in the SyncE module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: Bit 0 - Init and Shutdown traces Bit 1 - Management traces Bit 2 - Data Path traces [NOT REQUIRED IN SYNCE] Bit 3 - Control Plane traces Bit 4 - Packet Dump traces Bit 5 - Traces related to all resources except buffers Bit 6 - All Failure traces Bit 7 - Buffer allocation/release traces Bit 16 - SYNCE Function Entry traces Bit 17 - SYNCE Function Exit traces Bit 18 - SYNCE Critical traces The remaining bits are unused. Combination of levels are also allowed. For example, if the bits 19 and 20 are set, then the trace statement related to discovery and remote loopback related messages will be printed. The user has to enter the corresponding integer value for the bits set. For example, if bits 8 and 9 are to be set, then user has to give the value 0x300."
],
null,
null,
null,
[
"DEFVAL",
"'00000040'H"
]
]
}