Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsY1564ContextTraceOption",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"4294967295",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable the trace statements in Y1564 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byte integer, represents a level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Control Plane Traces 3 - Traces related to All Resources except Buffers 4 - Timer start, stop and expiry related Traces 5 - Critical Traces 6 - Y1731 interface related Traces 7 - Configuration/Performance test traces 8 - Session record traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and Management are generated. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set, the user has to enter the value 3. By default, critical trace(bit 5) is set.\"",
"DEFVAL",
"{",
"'",
"00000020",
"'",
"H",
"}",
"::=",
"{",
"fsY1564ContextEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
4294967295
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable the trace statements in Y1564 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byte integer, represents a level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Control Plane Traces 3 - Traces related to All Resources except Buffers 4 - Timer start, stop and expiry related Traces 5 - Critical Traces 6 - Y1731 interface related Traces 7 - Configuration/Performance test traces 8 - Session record traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and Management are generated. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set, the user has to enter the value 3. By default, critical trace(bit 5) is set."
],
null,
null,
null,
[
"DEFVAL",
"'00000020'H"
]
]
}