OID reference
1.3.6.1.4.1.29640.4.3.26
Not supported.
Identification
{1 3 6 1 4 1 29640 4 3 26}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.29640.4.3.26.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
pduStartupIpAddress OBJECT-TYPE
SYNTAX IpAddress
UNITS "IPv4 Addr"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not supported.
"
::= { pdu 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pduStartupIpAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pduStartupIpAddress",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"UNITS",
[
"literal",
"2249507634204164647222"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Not supported. \"",
"::=",
"{",
"pdu",
"26",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
[
"UNITS",
"IPv4 Addr"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Not supported."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: APNL-MODULAR-PDU-MIB
See published definition above
{'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'Integer32']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29640.4.3.1 | pduType | 0 | 0 | Type of the Pdu. PduModular (0) Modulaire OEC2 PDU communication through SNMPV3, MOD-BUS or AP-BUS in emulation mode. PduGatewa… |
| 1.3.6.1.4.1.29640.4.3.2 | pduProductIdentifier | 0 | 0 | Unique serial number to identify a pdu, the number is between 1 and 65535. |
| 1.3.6.1.4.1.29640.4.3.3 | pduSerialNumber | 0 | 0 | PDU onboard Serial Number. |
| 1.3.6.1.4.1.29640.4.3.4 | pduStatus | 0 | 0 | Status of the Pdu. pduBusy (0) Indicates that an admin command is in progress. pduReady (1) The execution of an admin command w… |
| 1.3.6.1.4.1.29640.4.3.5 | pduPower | 0 | 0 | The total measured pdu power in Kilo Watt\s*Hour. |
| 1.3.6.1.4.1.29640.4.3.6 | pduPowerL1 | 0 | 0 | The total measured pdu power in Kilo Watt\s*Hour for phase 1. |
| 1.3.6.1.4.1.29640.4.3.7 | pduPowerL2 | 0 | 0 | The total measured pdu power in Kilo Watt\s*Hour for phase 2. |
| 1.3.6.1.4.1.29640.4.3.8 | pduPowerL3 | 0 | 0 | The total measured pdu power in Kilo Watt\s*Hour for phase 3. |
| 1.3.6.1.4.1.29640.4.3.9 | pduKvar | 0 | 0 | The total Reactive Power of the pdu. It is the power that magnetic equipment (transformer, motor and relay) needs to produce th… |
| 1.3.6.1.4.1.29640.4.3.10 | pduKvarL1 | 0 | 0 | The total Reactive Power of the pdu for phase 1. It is the power that magnetic equipment (transformer, motor and relay) needs t… |
| 1.3.6.1.4.1.29640.4.3.11 | pduKvarL2 | 0 | 0 | The total Reactive Power of the pdu for phase 2. It is the power that magnetic equipment (transformer, motor and relay) needs t… |
| 1.3.6.1.4.1.29640.4.3.12 | pduKvarL3 | 0 | 0 | The total Reactive Power of the pdu for phase 3. It is the power that magnetic equipment (transformer, motor and relay) needs t… |
| 1.3.6.1.4.1.29640.4.3.13 | pdulAcurrent | 0 | 0 | The total measured ac current for the pdu (in 1/10th Amperes) . |
| 1.3.6.1.4.1.29640.4.3.14 | pduAcurrentL1 | 0 | 0 | The total measured ac current for phase 1 (in 1/10th Amperes). |
| 1.3.6.1.4.1.29640.4.3.15 | pduAcurrentL2 | 0 | 0 | The total measured ac current for phase 2 (in 1/10th Amperes). |
| 1.3.6.1.4.1.29640.4.3.16 | pduAcurrentL3 | 0 | 0 | The total measured ac current for phase 3 (in 1/10th Amperes). |
| 1.3.6.1.4.1.29640.4.3.17 | pduCurIpAddress | 0 | 0 | The current PDU IPv4 Address by which TCP/IP access is available. |
| 1.3.6.1.4.1.29640.4.3.18 | pduCurSubNetMask | 0 | 0 | The current PDU IPv4 Subnet Mask used by the Ipstack (e.g: 255.255.255.0). |
| 1.3.6.1.4.1.29640.4.3.19 | pduCurDefGwAddress | 0 | 0 | The current PDU IPv4 default gateway address used by the Ipstack (e.g: 192.168.1.1). |
| 1.3.6.1.4.1.29640.4.3.20 | pduNumberOfNodes | 0 | 0 | Number of items in the node table. |
| 1.3.6.1.4.1.29640.4.3.21 | pduNumberOfSensors | 0 | 0 | Number of items in the sensor table. |
| 1.3.6.1.4.1.29640.4.3.22 | pduSoftwareVersion | 0 | 0 | PDU software version number. |
| 1.3.6.1.4.1.29640.4.3.23 | pduFirmwareVersion | 0 | 0 | PDU firmware version number. |
| 1.3.6.1.4.1.29640.4.3.24 | pduBusProtocol | 0 | 0 | Selected protocol used on the external bus of the pdu. AP-BUS (0) Protocol used by OEC1 products or by OEC2 products in emulati… |
| 1.3.6.1.4.1.29640.4.3.25 | pduAdminCommand | 0 | 0 | PDU admin management Commands: noOp (0) No operation. rebootPdu (1) Reboot the PDU (to execute new settings). rediscover (2) No… |
| 1.3.6.1.4.1.29640.4.3.27 | pduStartupSubNetMask | 0 | 0 | Not supported. |
| 1.3.6.1.4.1.29640.4.3.28 | pduStartupDefGwAddress | 0 | 0 | Not supported. |
| 1.3.6.1.4.1.29640.4.3.29 | pduRealTimeClock | 0 | 0 | PDU Real-Time Clock. Maybe set by the manager. |
| 1.3.6.1.4.1.29640.4.3.30 | pduEnableFeatures | 0 | 0 | Array of bits each one an specific feature within the pdu: globalWebEnabled (0) This bit enables the PDU webpages. globalUsbEna… |
| 1.3.6.1.4.1.29640.4.3.31 | pduBusAddress | 0 | 0 | Address used to access this PDU via the external bus. When MOD-BUS protocol is used the address is valid between 1-247. When AP… |
| 1.3.6.1.4.1.29640.4.3.32 | pduName | 0 | 0 | Name of the PDU. |
| 1.3.6.1.4.1.29640.4.3.33 | nodeTable | 1 | 22 | A table of the modules on the PDU. Each entry represents an module unit. |
| 1.3.6.1.4.1.29640.4.3.34 | sensorTable | 1 | 11 | A table of the Sensors on the PDU. Each entry represents an an Sensor unit. |