ibm

IBM · unspecified

IBM OBJECT IDENTIFIER ::= { enterprises 2 }

atmMIBCompliance2 · current

atmMIBCompliance2    MODULE-COMPLIANCE
          STATUS         current
          DESCRIPTION
            "The compliance statement for SNMP entities
             including networks which have ATM and
             AAL5 interfaces."

          MODULE -- this module
     --
     -- ****** Interface and Traffic Descriptor Support ***
     --
            MANDATORY-GROUPS  {atmInterfaceConfGroup2,
                               atmTrafficDescrGroup2 }

            OBJECT         atmInterfaceMaxVpcs
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceMaxVccs
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceMaxActiveVpiBits
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required.
               At the ATM UNI the maximum number of
               active VPI bits configured for use ranges
               from 0 to 8 only.
               Implementations may support smaller ranges."
            OBJECT         atmInterfaceMaxActiveVciBits
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required.
               Implementations may support smaller ranges."

            OBJECT         atmInterfaceIlmiVpi
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceIlmiVci
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceMyNeighborIpAddress
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceMyNeighborIfName
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmInterfaceSubscrAddress
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParamIndexNext
            DESCRIPTION
              "This object is only required for systems
               that support the creation of entries in
               the atmTrafficDescrParamTable."

            OBJECT         atmTrafficDescrType
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParam1
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParam2
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParam3
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParam4
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrParam5
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmServiceCategory
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmTrafficDescrRowStatus
            SYNTAX         INTEGER {active(1)}

                             -- subset of RowStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required, and only one
               of the six enumerated values for the
               RowStatus textual convention need be
               supported, specifically: active(1)."

            OBJECT         atmTrafficFrameDiscard
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

     --
     -- ****** DS3 PLCP Support **************************
     --
            GROUP          atmInterfaceDs3PlcpGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement the
               DS3 PLCP layer."
     --
     -- ****** TC Sublayer Support ********************************
     --
            GROUP          atmInterfaceTCGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement the
               TC Sublayer."

     --
     -- ****** VPC Support *******************************
     --
            GROUP          atmVpcTerminationGroup2
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VPLs that terminate VPCs (i.e., ones which
               are NOT cross-connected to other VPLs)."

            GROUP          atmVplCrossConnectGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VPLs that are not associated with VCLs
               and are cross-connected to other VPLs
               for VPCs."

            GROUP          atmVpPvcCrossConnectGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VPLs that are not associated with VCLs
               and are cross-connected to other VPLs
               for permanent VPCs (i.e., PVCs).
               This group is not used to crossconnect
               a PVC with an SVC to form a Soft PVC."

            OBJECT         atmVplAdminStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVplReceiveTrafficDescrIndex
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVplTransmitTrafficDescrIndex
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVplRowStatus
            SYNTAX         INTEGER {active(1)}
                             -- subset of RowStatus
            MIN-ACCESS      read-only
            DESCRIPTION
              "Write access is not required, and only one
               of the six enumerated values for the
               RowStatus textual convention need be
               supported, specifically: active(1)."

            OBJECT         atmVplCastType
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVplConnKind
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVpCrossConnectAdminStatus
            MIN-ACCESS     read-only
            DESCRIPTION

              "Write access is not required."

            OBJECT         atmVpCrossConnectRowStatus
            SYNTAX         INTEGER {active(1)}
                             -- subset of RowStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required, and only one
               of the six enumerated values for the
               RowStatus textual convention need be
               supported, specifically: active(1)."

     --
     -- ****** VCC Support *******************************
     --
            GROUP          atmVccTerminationGroup2
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VCLs that terminate VCCs (i.e., ones which
               are NOT cross-connected to other VCLs)."

            GROUP          atmVclCrossConnectGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VCLs that are cross-connected to other VCLs
               for VCCs."

            GROUP          atmVcPvcCrossConnectGroup
            DESCRIPTION
              "This group is mandatory only for those
               ATM interfaces which implement ATM
               VCLs that are cross-connected to other
               VCLs for permanent VCCs (i.e., PVCs).
               This group is not used to crossconnect
               a PVC with an SVC to form a Soft PVC."

            OBJECT         atmVclAdminStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVclReceiveTrafficDescrIndex
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVclTransmitTrafficDescrIndex
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVccAalType
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVclRowStatus
            SYNTAX         INTEGER {active(1)}
                             -- subset of RowStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required, and only one
               of the six enumerated values for the
               RowStatus textual convention need be
               supported, specifically: active(1)."

            OBJECT         atmVclCastType
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVclConnKind
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVcCrossConnectAdminStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVcCrossConnectRowStatus
            SYNTAX         INTEGER { active(1)}
                             -- subset of RowStatus
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required, and only one
               of the six enumerated values for the
               RowStatus textual convention need be
               supported, specifically: active(1)."
     --
     -- ****** AAL5 Support ******************************
     --
            GROUP          aal5VccGroup
            DESCRIPTION
              "This group is mandatory for the
               AAL5 virtual connections only."
            OBJECT         atmVccAal5CpcsTransmitSduSize
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVccAal5CpcsReceiveSduSize
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."

            OBJECT         atmVccAal5EncapsType
            MIN-ACCESS     read-only
            DESCRIPTION
              "Write access is not required."
             ::= { enterprises 2 }