of the DS1 interface. This variable will be interpreted
only when csDs3Ds1LoopbackDestination is set to a
valid value. NOTE: This is applicable only for T1.
noLoop
Not in the loopback state. A device that is not
capable of performing a loopback on the interface
shall always return this as its value.
payloadLoop
The received signal at this interface is looped
through the device. Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
lineLoop
The received signal at this interface does not go
through the device (minimum penetration) but is
looped back out.
otherLoop
Loopbacks that are not defined here. Currently
not used in the IPSX system
inwardLoop
The transmitted signal at this interface is
looped back and received by the same interface.
What is transmitted onto the line is product
dependent. Cannot be applied to far end.
dualLoop
Both dsx1LineLoop and dsx1InwardLoop will be
active simultaneously. Cannot be applied to
far end.
Sources for this description
Circitor
Parsed from COSINE-ORION-MIB.mib · COSINE-ORION-MIB
Source file: Download COSINE-ORION-MIB.mib
MIBdepot
Source file: Download orion_mib_v31.txt
Source file: Download cosine_all.mib
Source file: Download COSINE-ORION-MIB.mib.txt