| 1.3.6.1.4.1.3085.3.1.3.4.2.1.1 |
csFrCircuitSubIf | 0 | 0 |
The identifier for this Frame Relay Circuit. This
corresponds to the 'subinterface' entered via the CLI. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.2 |
csFrCircuitDlci | 0 | 0 |
The Data Link Connection Identifier for this virtual
circuit. Note, this impelemtation supports only values between
16 and 1023 … |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.3 |
csFrCircuitState | 0 | 0 |
Indicates whether the particular virtual circuit is
operational. In the absence of a Data Link Connection
Management Interface, … |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.4 |
csFrCircuitReceivedFECNs | 0 | 0 |
Number of frames received from the network indicating
forward congestion since the virtual circuit was
created. This occurs when… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.6 |
csFrCircuitSentFrames | 0 | 0 |
The number of frames sent from this virtual circuit
since it was created. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.7 |
csFrCircuitSentOctets | 0 | 0 |
The number of octets sent from this virtual circuit
since it was created. Octets counted are the full
frame relay header and the… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.8 |
csFrCircuitReceivedFrames | 0 | 0 |
Number of frames received over this virtual circuit
since it was created. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.9 |
csFrCircuitReceivedOctets | 0 | 0 |
Number of octets received over this virtual circuit
since it was created. Octets counted include the full
frame relay header, bu… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.10 |
csFrCircuitCreationTime | 0 | 0 |
The value of sysUpTime when the virtual circuit was
created, whether by the Data Link Connection Management
Interface or by a Set… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.11 |
csFrCircuitLastTimeChange | 0 | 0 |
The value of sysUpTime when last there was a change in
the virtual circuit state |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.12 |
csFrCircuitCommittedBurst | 0 | 0 |
This variable indicates the maximum amount of data, in
bits, that the network agrees to transfer under normal
conditions, during … |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.13 |
csFrCircuitExcessBurst | 0 | 0 |
This variable indicates the maximum amount of
uncommitted data bits that the network will attempt to
deliver over the measurement… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.14 |
csFrCircuitThroughput | 0 | 0 |
Throughput is the average number of 'Frame Relay
Information Field' bits transferred per second across a
user network interface i… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.15 |
csFrCircuitMulticast | 0 | 0 |
This indicates whether this VC is used as a unicast VC
(i.e. not multicast) or the type of multicast service
subscribed to |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.16 |
csFrCircuitType | 0 | 0 |
Indication of whether the VC was manually created
(static), or dynamically created (dynamic) via the data
link control management… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.17 |
csFrCircuitDiscards | 0 | 0 |
The number of inbound frames dropped because of format
errors, or because the VC is inactive. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.18 |
csFrCircuitReceivedDEs | 0 | 0 |
Number of frames received from the network indicating
that they were eligible for discard since the virtual
circuit was created. … |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.19 |
csFrCircuitSentDEs | 0 | 0 |
Number of frames sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.20 |
csFrCircuitRemoteIpAddress | 0 | 0 |
The remote IP address mapped to this VC. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.21 |
csFrCircuitRowStatus | 0 | 0 |
This object is used to create a new row or modify or
destroy an existing row in the manner described in the
definition of the Row… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.22 |
csFrCircuitOperStatus | 0 | 0 |
The operational status of this circuit. |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.23 |
csFrCircitFwdDlciType | 0 | 0 |
Indication of whether the DLCI corresponding to the forward link of this
DLCI, is a Frame Relay DLCI or Frame over IP DLCI. Depe… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.24 |
csFrCircuitFwdLink | 0 | 0 |
The forwarding link of this DLCI. This is a switching
parameters for intra blade and inter-blade switching.
It takes the followin… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.25 |
csFrCircuitRatePolice | 0 | 0 |
This object enables or disables ingress traffic
rate-policing.
Ingress rate-policing is controlled by the values
configured for cs… |
| 1.3.6.1.4.1.3085.3.1.3.4.2.1.26 |
csFrCircuitUpperProtocol | 0 | 0 |
This object is used to set the upper protocol.
For PPP over FR this is set to 'ppp'.
NOTE: This object cannot be set to 'ip'. Onl… |