OID reference
1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2
Indicates the administrator's intent as to whether LDP should be enabled or disabled on this router.
Identification
{1 3 6 1 4 1 3085 3 1 4 2 10 3 1 1 2}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In COSINE-ORION-MIB, the row index consists of these components in order:
csOrionGlobalVPNIndex (Integer32): one numeric subidentifier for the non-negative value.csOrionVPNVRouterIndex (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2.<csOrionGlobalVPNIndex>.<csOrionVPNVRouterIndex: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from COSINE-ORION-MIB.mib · COSINE-ORION-MIB
Source file: Download COSINE-ORION-MIB.mib
Historical records
csLdpVrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administrator's intent as to whether
LDP should be enabled or disabled on this router."
DEFVAL { enabled }
::= { csLdpVrConfEntry 2 }
csLdpVrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administrator's intent as to whether
LDP should be enabled or disabled on this router."
DEFVAL { enabled }
::= { csLdpVrConfEntry 2 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.1 | csLdpVrConfRowStatus | 0 | 0 | The existence state of this table. This object follows the Row Status behaviour |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.3 | csLdpVrEventLogLevel | 0 | 0 | This specifies the level of detail for the event log. |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.4 | csLdpVrEventLogArea | 0 | 0 | Each bit within this object enables loggin for a specific area within LDP. Below is a list of the different areas available for … |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.5 | csLdpVrEventLogAreaMask | 0 | 0 | csLdpVrEventLogAreaMask is used to indicate which area bit is being set to on/off. Below is a list of the different areas availab… |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.6 | csLdpVrRoutePreference | 0 | 0 | Route preference Value for LDP routes |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.7 | csLdpVrAutorouteAnnounce | 0 | 0 | Indicates the administrator's intent to let BGP use LDP LSP's present in MPLS RIB for the bgp-next-hop resolution |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.8 | csLdpVrVpnAutorouteAnnounce | 0 | 0 | Indicates the administrator's intent to let Vpn use LDP LSP's present in MPLS RIB for the vpn-next-hop resolution |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.9 | csLdpVrPwe3AutorouteAnnounce | 0 | 0 | Indicates the administrator's intent to let PWE3 use LDP LSP's present in MPLS RIB for the next-hop resolution |
| 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.10 | csLdpVrAcceptTargetedHellos | 0 | 0 | Indicates the targeted hellos are accepeted or rejected |