| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.1 |
csBgpNbrGroupName | 0 | 0 |
The Name of the BGP Group |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.2 |
csBgpNbrGroupAdminStatus | 0 | 0 |
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A tra… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.4 |
csBgpNbrGroupMd5Password | 0 | 0 |
The Md5 password used to authenticate messages exchanged with the neighbors defined in the group. This attribute can be over-ridd… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.5 |
csBgpNbrGroupRowStatus | 0 | 0 |
The RowStatus object for this table. This is used to add & remove rows from this table. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.6 |
csBgpNbrGroupHoldTimeConfigured | 0 | 0 |
The configured holdtime to be used by the neighbors in this group. default value is -1 which indicates this is not configured and… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.7 |
csBgpNbrGroupLocalAddr | 0 | 0 |
The IpAddress to be used at the local end of the connection with the bgp peers in this group. If the LocalAddr is set to 0.0.0.0,… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.8 |
csBgpNbrGroupNextHopSelf | 0 | 0 |
To enable/disable this system to be the next hopself for an ebgp session with the bgp peers in this group. default is -1 which ind… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.9 |
csBgpNbrGroupMhopGw | 0 | 0 |
To specify the gateway address if the ebgp neighbors belonging to this group are not directly connected to this system. If the Mho… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.10 |
csBgpNbrGroupMhopTTL | 0 | 0 |
To specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp session… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.11 |
csBgpNbrGroupIpv4AdminStatus | 0 | 0 |
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP sp… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.12 |
csBgpNbrGroupVpnIpv4AdminStatus | 0 | 0 |
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BG… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.13 |
csBgpNbrGroupVpnIpv4AllowRfc2547Customers | 0 | 0 |
This attribute specifies the scope of RFC2547bis customers provisioned by this BGP speaker.
none : no rfc2547 customers all : all… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.14 |
csBgpNbrGroupVpnIpv4AllowVrmodelCustomers | 0 | 0 |
This attribute specifies the scope of VR-model customers provisioned by this BGP speaker.
none : no VR-model customers all : all … |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.15 |
csBgpNbrGroupKeepAliveConfigured | 0 | 0 |
The configured keepalive to be used by the neighbors in this group. default value is -1 which indicates this is not configured an… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.16 |
csBgpNbrGroupRemovePrivateAs | 0 | 0 |
This attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with E… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.17 |
csBgpNbrGroupLogAreaFlag | 0 | 0 |
Each bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas avail… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.18 |
csBgpNbrGroupMaxPfx | 0 | 0 |
This attribute is used to set the maximum number of prefixes that can be learnt from each neighbor in this group. If a neighbor ad… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.19 |
csBgpNbrGroupVpnLogAreaFlag | 0 | 0 |
Each bit within this object enables loggin for a specific area within BGP Neighbor related to VPN routing. If the group level val… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.20 |
csBgpNbrGroupMaxPfxThreshold | 0 | 0 |
If this attribute is configured, then when the number of routes learnt from the peers in this group reaches this threshold (perce… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.21 |
csBgpNbrGroupMaxPfxType | 0 | 0 |
This attribute indicates the action that needs to be taken when the number of routes learnt from the peers in this group reaches … |