Description 1
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.
If a list of servers has been configured, then
all requests are forwarded to all servers
priority or precedence is applied.
OID reference
1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4
This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers priority or precedence is applied.
Identification
{1 3 6 1 4 1 3085 3 1 6 15 1 1 1 4}
Notes below names come from selected MIB definitions.
| Value | Name and source notes |
|---|---|
| 1 | enabled enable DHCP packet forwarding. |
| 2 | disabled stop the forwarding function. |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In COSINE-ORION-MIB, the row index consists of these components in order:
csOrionGlobalVPNIndex (Integer32): one numeric subidentifier for the non-negative value.csOrionVPNVRouterIndex (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4.<csOrionGlobalVPNIndex>.<csOrionVPNVRouterIndex: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
csOrionVrDhcpRelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1), -- enable DHCP packet forwarding.
disabled (2) -- stop the forwarding function.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the desired state of the DHCP
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.
If a list of servers has been configured, then
all requests are forwarded to all servers -- no
priority or precedence is applied."
DEFVAL { disabled }
::= { csOrionVrDhcpRelayConfigEntry 4 }csOrionVrDhcpRelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1), -- enable DHCP packet forwarding.
disabled (2) -- stop the forwarding function.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the desired state of the DHCP
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.
If a list of servers has been configured, then
all requests are forwarded to all servers -- no
priority or precedence is applied."
DEFVAL { disabled }
::= { csOrionVrDhcpRelayConfigEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Description 2
This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: csOrionVrDhcpRelayAdminStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"csOrionVrDhcpRelayAdminStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"csOrionVrDhcpRelayConfigEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Module: COSINE-ORION-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TestAndIncr', 'TimeStamp', 'TruthValue', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'Integer32', 'TimeTicks', 'IpAddress', 'NOTIFICATION-TYPE'], 'COSINE-GLOBAL-REG': ['csModules', 'csOrionMIB']}Module: COSINE-ORION-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TestAndIncr', 'TimeStamp', 'TruthValue', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'Integer32', 'TimeTicks', 'IpAddress', 'NOTIFICATION-TYPE'], 'COSINE-GLOBAL-REG': ['csModules', 'csOrionMIB']}Module: COSINE-ORION-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'StorageType', 'TestAndIncr', 'TimeStamp', 'TruthValue', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'Integer32', 'TimeTicks', 'IpAddress', 'NOTIFICATION-TYPE'], 'COSINE-GLOBAL-REG': ['csModules', 'csOrionMIB']}Module: COSINE-ORION-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'StorageType', 'TestAndIncr', 'TimeStamp', 'TruthValue', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'Integer32', 'TimeTicks', 'IpAddress', 'NOTIFICATION-TYPE'], 'COSINE-GLOBAL-REG': ['csModules', 'csOrionMIB']}Historical records
csOrionVrDhcpRelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the desired state of the DHCP
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.
If a list of servers has been configured, then
all requests are forwarded to all servers
priority or precedence is applied."
DEFVAL { disabled }
::= { csOrionVrDhcpRelayConfigEntry 4 }
csOrionVrDhcpRelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the desired state of the DHCP
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.
If a list of servers has been configured, then
all requests are forwarded to all servers
priority or precedence is applied."
DEFVAL { disabled }
::= { csOrionVrDhcpRelayConfigEntry 4 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.1 | csOrionVrDhcpRelayMaxHops | 0 | 0 | The upper limit for the 'hops' field of DHCP requests. Any request with a value exceeding this limit will be dropped by the relay… |
| 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.2 | csOrionVrDhcpRelaySecsThreshold | 0 | 0 | The threshold, in seconds, for the 'time elapsed' field of DHCP requests. This value is used to prioritize clients across the rel… |
| 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.3 | csOrionVrDhcpRelayOperStatus | 0 | 0 | This object indicates the current operational status of the relay agent. |