OID reference
1.3.6.1.4.1.3181.10.6.2.45.1.1.8
For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised.
Identification
{1 3 6 1 4 1 3181 10 6 2 45 1 1 8}
| Value | Name |
|---|---|
| 0 | bothPorts |
| 1 | portA |
| 2 | portB |
| 3 | none |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In G6-RING-MIB, the row index configIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.3181.10.6.2.45.1.1.8.<configIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3181.10.6.2.45.1.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
configFailureDetection OBJECT-TYPE -- failure_detection
SYNTAX INTEGER
{
bothPorts (0),
portA (1),
portB (2),
none (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised."
::= { configEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: configFailureDetection
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"configFailureDetection",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"bothPorts",
"(",
"0",
")",
",",
"portA",
"(",
"1",
")",
",",
"portB",
"(",
"2",
")",
",",
"none",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised.\"",
"::=",
"{",
"configEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"bothPorts",
0
],
[
"portA",
1
],
[
"portB",
2
],
[
"none",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: G6-RING-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'enterprises', 'NOTIFICATION-TYPE'], 'MICROSENS-G6-MIB': ['g6']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.1 | configIndex | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.2 | configName | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.3 | configEnableRing | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.4 | configRingMaster | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.5 | configNumber | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.6 | configPortA | 0 | 0 | |
| 1.3.6.1.4.1.3181.10.6.2.45.1.1.7 | configPortB | 0 | 0 |