OID reference
1.3.6.1.4.1.326.1.20.1.5.1.31
The type of disjoint path requested for this LSP.
Identification
{1 3 6 1 4 1 326 1 20 1 5 1 31}
| Value | Name |
|---|---|
| 1 | partial |
| 2 | full |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In FORE-MPLS-LSR-MIB, the row index mplsTunnelIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.326.1.20.1.5.1.31.<mplsTunnelIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.326.1.20.1.5.1.31
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from fore_mpls.mib.txt · marconi · FORE-MPLS-LSR-MIB
Source file: Download fore_mpls.mib.txt
Source data warning: The published MIB attaches named values to Integer32, outside the SMIv2 enumeration grammar. The original type, labels and numbers are preserved; no conversion to INTEGER is made.
Historical records
mplsTunnelComputeDisjointEro OBJECT-TYPE
SYNTAX Integer32 { partial(1), full(2) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The type of disjoint path requested for this LSP."
::= { foreMplsTunnelEntry 31 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.1.20.1.5.1.1 | mplsTunnelIndex | 0 | 0 | Index into this table identifying the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.2 | mplsTunnelName | 0 | 0 | The 'canonical' name assigned to the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.3 | mplsTunnelType | 0 | 0 | Type of the tunnel: originating on this node, terminating on this node, or both originating and terminating on this node. |
| 1.3.6.1.4.1.326.1.20.1.5.1.4 | mplsTunnelOrigId | 0 | 0 | IP address of the interface where the tunnel originates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.5 | mplsTunnelTermId | 0 | 0 | IP address of the interface where the tunnel terminates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.6 | mplsTunnelTermRid | 0 | 0 | Router ID where the tunnel terminates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.7 | mplsTunnelProtocol | 0 | 0 | Indicates how the tunnel setup was initiated: either by a network administrator or automatically. |
| 1.3.6.1.4.1.326.1.20.1.5.1.8 | mplsTunnelAdminStatus | 0 | 0 | Adminstrative status of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.9 | mplsTunnelOperStatus | 0 | 0 | Operational status of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.10 | mplsTunnelEroTagIndex | 0 | 0 | The ERO tag configured for this tunnel. This ERO tag is referred to for picking a path for this tunnel. Either mplsTunnelEroTagI… |
| 1.3.6.1.4.1.326.1.20.1.5.1.11 | mplsTunnelTrafficSpecIndex | 0 | 0 | The traffic spec configured for this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.12 | mplsTunnelUseDynamicERO | 0 | 0 | When set, the tunnels will use dynamically computed EROs to setup the path. Either mplsTunnelEroTagIndex be configured or mplsTun… |
| 1.3.6.1.4.1.326.1.20.1.5.1.13 | mplsTunnelPreference | 0 | 0 | The preference of the tunnel. Tunnels with a higher preference value are more likely to be used for forwarding. |
| 1.3.6.1.4.1.326.1.20.1.5.1.14 | mplsTunnelUsability | 0 | 0 | Specify whether the LSP is usable in forwarding packets. |
| 1.3.6.1.4.1.326.1.20.1.5.1.15 | mplsTunnelRowStatus | 0 | 0 | For creating, modifying and deleting this row. |
| 1.3.6.1.4.1.326.1.20.1.5.1.16 | mplsTunnelLastChangeTime | 0 | 0 | The time since the last change of operational state for this tunnal. |
| 1.3.6.1.4.1.326.1.20.1.5.1.17 | mplsTunnelRetryCount | 0 | 0 | Number of attempts made in trying to signal this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.18 | mplsTunnelFailureCause | 0 | 0 | Reason for failure of tunnel to become operationally up |
| 1.3.6.1.4.1.326.1.20.1.5.1.19 | mplsTunnelOutIPInterface | 0 | 0 | The outgoing IP interface for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.20 | mplsTunnelOutLabel | 0 | 0 | The outgoing label used for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.21 | mplsTunnelInIPInterface | 0 | 0 | The incoming IP interface for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.22 | mplsTunnelInLabel | 0 | 0 | The incoming label used for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.23 | mplsTunnelOrigTunnelIndex | 0 | 0 | The tunnel index assigned to this tunnel on the originating router. |
| 1.3.6.1.4.1.326.1.20.1.5.1.24 | mplsTunnelOrigSignallingIndex | 0 | 0 | The call reference index used by signalling. For RSVP this would be the session lsp id. |
| 1.3.6.1.4.1.326.1.20.1.5.1.25 | mplsTunnelSignallingProto | 0 | 0 | The signalling protocol used to setup this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.26 | mplsTunnelConfOutIPInterface | 0 | 0 | For tunnels that are not signalled, this parameter specifies the outgoing IP interface. |
| 1.3.6.1.4.1.326.1.20.1.5.1.27 | mplsTunnelConfOutLabel | 0 | 0 | For tunnels that are not signalled, this parameter specifies the outgoing label to use. |
| 1.3.6.1.4.1.326.1.20.1.5.1.28 | mplsTunnelPayloadType | 0 | 0 | The payload type of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.29 | mplsTunnelIncludeAdminGroups | 0 | 0 | Admin Groups that need to be used by this tunnel. The tunnel may use any link that has at least one admin group in common with … |
| 1.3.6.1.4.1.326.1.20.1.5.1.30 | mplsTunnelExcludeAdminGroups | 0 | 0 | Admin Groups that need to be avoided by this tunnel. They tunnel must exclude all links that have an admin group in common with… |
| 1.3.6.1.4.1.326.1.20.1.5.1.32 | mplsTunnelReferenceIndex | 0 | 0 | The tunnel whose path is referenced when computing a disjoint path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.33 | mplsTunnelNumDisjointNodes | 0 | 0 | The number of nodes in the computed disjoint path that are disjoint from the reference path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.34 | mplsTunnelNumDisjointLinks | 0 | 0 | The number of links in the computed disjoint path that are disjoint from the reference path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.35 | mplsTunnelConfInIPInterface | 0 | 0 | For terminating tunnels that are not signalled, this parameter specifies the incoming IP interface. |
| 1.3.6.1.4.1.326.1.20.1.5.1.36 | mplsTunnelConfInLabel | 0 | 0 | For terminating tunnels that are not signalled, this parameter specifies the incoming label to use. |