| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.1 |
portNumber | 0 | 0 |
The value of this object identifies the port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.2 |
portAdminStatus | 0 | 0 |
The desired state of this port. The up(3) state
indicates that SPANS (Simple Protocol for ATM Network Signalling),
FORE's link s… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.3 |
portOperStatus | 0 | 0 |
The current operational state of this port,
as determined either by administrative action,
when the value of portAdminStatus is d… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.4 |
portTime | 0 | 0 |
The length of time this port has been in its current state,
in hundredths of a second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.5 |
portRemoteAtmAddress | 0 | 0 |
The ATM address of the entity connected to this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.6 |
portRemoteIpAddress | 0 | 0 |
The IP address of the entity connected to this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.7 |
portMaxPathsIn | 0 | 0 |
The maximum number of incoming virtual paths
supported by this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.8 |
portNumPathsIn | 0 | 0 |
The number of incoming virtual paths on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.9 |
portMaxBandwidthIn | 0 | 0 |
The maximum incoming bandwidth of this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.10 |
portAllocBandwidthIn | 0 | 0 |
The allocated incoming bandwidth of this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.11 |
portUsedBandwidthIn | 0 | 0 |
The incoming bandwidth being used on this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.12 |
portReceivedCells | 0 | 0 |
The number of cells received on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.13 |
portMaxPathsOut | 0 | 0 |
The maximum number of outgoing virtual paths
supported by this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.14 |
portNumPathsOut | 0 | 0 |
The number of outgoing virtual paths on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.15 |
portMaxBandwidthOut | 0 | 0 |
The maximum outgoing bandwidth of this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.16 |
portAllocBandwidthOut | 0 | 0 |
The allocated outgoing bandwidth of this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.17 |
portUsedBandwidthOut | 0 | 0 |
The outgoing bandwidth being used on this port,
in cells per second. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.18 |
portTransmittedCells | 0 | 0 |
The number of cells transmitted on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.19 |
portHwBoard | 0 | 0 |
The hardware board number of this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.20 |
portHwModule | 0 | 0 |
The hardware module number of this port. For a control port
(a software port), the value of this object is the maximun
number of … |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.21 |
portHwNumber | 0 | 0 |
The hardware port number of this port. For a control port
(a software port), the value of this object is 0. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.22 |
portILMIRemoteIpAddress | 0 | 0 |
The IP address of the entity connected to this port that
was discovered using ILMI on path 0. If there is no q2931
siganlling pat… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.23 |
portCDVT | 0 | 0 |
The Cell Delay Variation Tolerance associated with this
physical port. Connections take their default value
for CDVT from the in… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.25 |
portVbrOverbooking | 0 | 0 |
The percentage of overbooking for nrtVBR connections.
The default value is 100 (no overbooking). |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.26 |
portVbrBufferOverb | 0 | 0 |
The percentage of buffer overbooking for nrtVBR connections.
The default value is 100 (no overbooking). |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.27 |
portManagementStatus | 0 | 0 |
The visibility of this port in the management station's
view. The default value is 1 (managed). |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.28 |
portAISRDIGeneration | 0 | 0 |
The port ATM layer AIS and RDI generation status. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.33 |
portGCRAPolicingCBR | 0 | 0 |
This variable defines the per-port policing configuration for
CBR connections. The states mean the following:
allOn: ALL CBR con… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.34 |
portGCRAPolicingVBR | 0 | 0 |
This variable defines the per-port policing configuration for
nrtVBR connections. The states mean the following:
allOn: ALL nrtV… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.35 |
portAAL5PacketDiscardCBR | 0 | 0 |
This variable defines the per-port AAL5 packet discard
configuration for CBR connections. The states mean the
following:
allOn: … |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.36 |
portAAL5PacketDiscardVBR | 0 | 0 |
This variable defines the per-port AAL5 packet discard
configuration for nrtVBR connections. The states mean the
following:
allOn… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.37 |
portAAL5PacketDiscardUBR | 0 | 0 |
This variable defines the per-port AAL5 packet discard
configuration for UBR connections. The states mean the
following:
allOn: … |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.38 |
portInputCACErrors | 0 | 0 |
The number of input CAC (Call Admission Control)
failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.39 |
portInputVPIErrors | 0 | 0 |
The number of input VPI allocation failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.40 |
portInputVCIErrors | 0 | 0 |
The number of input VCI allocation failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.41 |
portInputSetupErrors | 0 | 0 |
The number of input connection setup failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.42 |
portOutputCACErrors | 0 | 0 |
The number of output CAC (Call Admission Control)
failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.43 |
portOutputVPIErrors | 0 | 0 |
The number of output VPI allocation failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.44 |
portOutputVCIErrors | 0 | 0 |
The number of output VCI allocation failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.45 |
portOutputSetupErrors | 0 | 0 |
The number of output connection setup failures on this port. |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.46 |
portPPPolicingCBR | 0 | 0 |
This variable defines the per-port AAL5 Partial Packet
Policing configuration for CBR connections. The states
of this variable m… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.47 |
portPPPolicingVBR | 0 | 0 |
This variable defines the per-port AAL5 Partial Packet
Policing configuration for nrtVBR connections. The states
of this variabl… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.48 |
portUBRTagging | 0 | 0 |
This variable defines the per-port configuration for
tagging (setting CLP=1) of all cells on UBR connections.
The states of this … |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.49 |
portInputCdv | 0 | 0 |
The current value of Cell Delay Variation attributed
to the input side of this port, which can be either a
user specified value o… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.50 |
portInputMaxctd | 0 | 0 |
This variable give the maximum Cell Transfer Delay that
is being attributed to the input side of this port. The
value can be eit… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.51 |
portInputDelayMode | 0 | 0 |
This variable controls whether the Cell Delay Variation
and Maximum Cell Transfer Delay values attributed to the
input side of th… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.52 |
portOutputCdv | 0 | 0 |
If portOutputDelayMode == userSpecified then this variable
contains the constant amount of Cell Delay Variation
that is being att… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.53 |
portOutputMaxctd | 0 | 0 |
This variable gives the maximum Cell Transfer Delay that
is being attributed to the output side of this port. The
value can be e… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.54 |
portOutputDelayMode | 0 | 0 |
This variable controls whether the Cell Delay Variation
value contributed by the input side of this port is based
on a user defin… |
| 1.3.6.1.4.1.326.2.2.2.1.2.2.1.59 |
portCACStatus | 0 | 0 |
The enforcement state of call admission control. The
default is enabled(1). |