object to no-reset(3) has no effect. Setting this object to
warm-start(2) will reset the agent. The agent always returns no-reset(3)
when this object is read.
OID reference
1.3.6.1.4.1.326.2.20.1.11.1.2.6
This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to warm-start(2) will reset the agent. The agent always returns no-reset(3) when this object is read.
Identification
{1 3 6 1 4 1 326 2 20 1 11 1 2 6}
| Value | Name |
|---|---|
| 1 | other |
| 2 | warm-start |
| 3 | no-reset |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.326.2.20.1.11.1.2.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Historical records
agentSystemReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
warm-start(2),
no-reset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the agent system reset state. Setting this
object to no-reset(3) has no effect. Setting this object to
warm-start(2) will reset the agent. The agent always returns no-reset(3)
when this object is read."
::= { agentBasicConfig 6 }
agentSystemReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
warm-start(2),
no-reset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the agent system reset state. Setting this
object to no-reset(3) has no effect. Setting this object to
warm-start(2) will reset the agent. The agent always returns no-reset(3)
when this object is read."
::= { agentBasicConfig 6 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.11.1.2.6.0 | agentSystemReset | 0 | 0 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.11.1.2.1 | agentFirmwareFile | 1 | 1 | The name of the firmware file to be downloaded. |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.2 | agentFirmwareSourceAddr | 1 | 1 | The ip address where new firmware file is located on. |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.3 | agentFirmwareUpdateCtrl | 1 | 1 | while this object is set to 'activate', FTP download is working immediately, and agentFirmwareUpdateState is changed to 'in-proc… |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.4 | agentFirmwareUpdateState | 1 | 1 | status of firmware download control. If the value is 'other', means never firmware updated since device started up. |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.5 | agentFirmwareLastUpdateTime | 1 | 1 | record the sysUptime for last active agentFirmwareUpdateCtrl. Default is set to 0. |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.7 | agentRs232PortConfig | 1 | 1 | This object indicates the RS-232C mode while device restart. |
| 1.3.6.1.4.1.326.2.20.1.11.1.2.8 | agentOutOfBandBaudRateConfig | 1 | 1 | This object indicates the out_of_band baud rate while device restart. |