A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the…
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
Documented MIB packages
The FS.COM catalogue lists MIB packages containing this definition for these models:
A definition in a model's MIB package does not establish that the device implements it or permits access.
Published definition
The displayed source records contain one distinct definition. Compare its source records.
dot3adAggActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
43.6)."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.4"
::= { dot3adAggEntry 4 }
Meaning
Descriptions
1 unique
Identical descriptions are grouped. Different wording and device-specific notes are retained.
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)FS.COM official Documentation Hub native MIB packages
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), FS.COM official Documentation Hub native MIB packages1 record · 2 sources
dot3adAggActorSystemID · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), FS.COM official Documentation Hub native MIB packages2 sources
Status in source: current.
Names: dot3adAggActorSystemID
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot3adAggActorSystemID",
"OBJECT-TYPE",
"SYNTAX",
"MacAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
"REFERENCE",
"\"IEEE 802.3 Subclause 30.7.1.1.4\"",
"::=",
"{",
"dot3adAggEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"MacAddress"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
],
[
"REFERENCE",
"IEEE 802.3 Subclause 30.7.1.1.4"
],
null,
null,
null
]
}