OID reference
1.3.6.1.4.1.35265.125.1.1.2.1.8
To start/stop the dual control peer detection protocol on the VPC switch. The following options are supported: Note: The peer VPC switch's IP address has to be configured for the peer detection protocol to start on an VPC switch.
Identification
{1 3 6 1 4 1 35265 125 1 1 2 1 8}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: eltexVpcDomainIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.35265.125.1.1.2.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
eltexVpcDomainPeerDetectionMode OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To start/stop the dual control peer detection protocol on the
VPC switch.
The following options are supported:
Note: The peer VPC switch's IP address has to be configured for
the peer detection protocol to start on an VPC switch."
DEFVAL {disabled}
::= { eltexVpcDomainConfigEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
To start/stop the dual control peer detection protocol on the VPC switch. The following options are supported: Note: The peer VPC switch's IP address has to be configured for the peer detection protocol to start on an VPC switch.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: eltexVpcDomainPeerDetectionMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eltexVpcDomainPeerDetectionMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"To start/stop the dual control peer detection protocol on the VPC switch. The following options are supported: Note: The peer VPC switch's IP address has to be configured for the peer detection protocol to start on an VPC switch.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"eltexVpcDomainConfigEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"To start/stop the dual control peer detection protocol on the VPC switch. The following options are supported: Note: The peer VPC switch's IP address has to be configured for the peer detection protocol to start on an VPC switch."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ELTEX-VPC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'ELTEX-SMI-ACTUAL': ['eltexLtd']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.125.1.1.2.1.1 | eltexVpcDomainIndex | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.2 | eltexVpcDomainPeerLink | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.3 | eltexVpcDomainKeepalivePriority | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.4 | eltexVpcDomainKeepaliveTimeout | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.5 | eltexVpcDomainKeepaliveMode | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.6 | eltexVpcDomainSystemMac | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.7 | eltexVpcDomainSystemPriority | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.9 | eltexVpcDomainPeerDetectionInterval | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.10 | eltexVpcDomainPeerDetectionTimeout | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.11 | eltexVpcDomainPeerIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.12 | eltexVpcDomainSourceIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.13 | eltexVpcDomainDcpdpUdpPort | 0 | 0 | |
| 1.3.6.1.4.1.35265.125.1.1.2.1.14 | eltexVpcDomainStatus | 0 | 0 |