OID reference
1.3.6.1.4.1.35265.45.1.2.2.1.1.10
Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, the change will only take effect after the peer has been cycled admin_status DOWN and then UP, thus forcing the peer se…
Identification
{1 3 6 1 4 1 35265 45 1 2 2 1 1 10}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: eltexBgpProcessId, eltexBgpPeerGroupName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.35265.45.1.2.2.1.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
eltexBgpPeerGroupConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time interval for the ConnectRetry timer. The suggested
value for this timer is 120 seconds.
This field can be changed at any time. However, if the
field is changed while the peer is admin_status UP, the
change will only take effect after the peer has been
cycled admin_status DOWN and then UP, thus forcing the
peer session to be restarted."
DEFVAL { 120 }
::= { eltexBgpPeerGroupEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, the change will only take effect after the peer has been cycled admin_status DOWN and then UP, thus forcing the peer session to be restarted.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: eltexBgpPeerGroupConnectRetryInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eltexBgpPeerGroupConnectRetryInterval",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, the change will only take effect after the peer has been cycled admin_status DOWN and then UP, thus forcing the peer session to be restarted.\"",
"DEFVAL",
"{",
"120",
"}",
"::=",
"{",
"eltexBgpPeerGroupEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, the change will only take effect after the peer has been cycled admin_status DOWN and then UP, thus forcing the peer session to be restarted."
],
null,
null,
null,
[
"DEFVAL",
120
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ELTEX-BGP-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'TruthValue', 'RowStatus', 'TimeStamp', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ELTEX-SMI-ACTUAL': ['eltexLtd'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetAddressPrefixLength']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.1 | eltexBgpPeerGroupName | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.2 | eltexBgpPeerGroupRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.3 | eltexBgpPeerGroupRemoteAs | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.4 | eltexBgpPeerGroupSourceInterface | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.5 | eltexBgpPeerGroupNxtHopSlf | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.6 | eltexBgpPeerGroupConfigMaxPrfx | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.7 | eltexBgpPeerGroupConfigDropWarn | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.8 | eltexBgpPeerGroupMaxPrfxHold | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.9 | eltexBgpPeerGroupConfigThreshold | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.11 | eltexBgpPeerGroupHoldTimeConfigd | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.12 | eltexBgpPeerGroupKeepAliveConfigd | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.13 | eltexBgpPeerGroupMinRouteAdvertiseInterval | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.14 | eltexBgpPeerGroupMinASOriginationInterval | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.15 | eltexBgpPeerGroupMinRouteWithdrawInterval | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.16 | eltexBgpPeerGroupConfigOpenDelay | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.17 | eltexBgpPeerGroupConfigIdleHold | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.18 | eltexBgpPeerGroupDistListPlIn | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.19 | eltexBgpPeerGroupDistListPlOut | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.20 | eltexBgpPeerGroupReflectorClient | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.21 | eltexBgpPeerGroupSoftResetWithStoredInfo | 0 | 0 | |
| 1.3.6.1.4.1.35265.45.1.2.2.1.1.22 | eltexBgpPeerGroupBfdDesired | 0 | 0 |