OID reference
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19
Firmware internal enclosure index
Identification
{1 3 6 1 4 1 3582 4 1 4 2 1 2 1 19}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In LSI-MegaRAID-SAS-MIB, the row index physDevID is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19.<physDevID>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
enclIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION "Firmware internal enclosure index"
::= { physicalDriveEntry 19 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Common and standard MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: optional.
Names: enclIndex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"enclIndex",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-only",
"STATUS",
"optional",
"DESCRIPTION",
"\"Firmware internal enclosure index\"",
"::=",
"{",
"physicalDriveEntry",
"19",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"optional"
],
[
"DESCRIPTION",
"Firmware internal enclosure index"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: LSI-MegaRAID-SAS-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['private', 'enterprises', 'Counter', 'Gauge'], 'RFC1213-MIB': ['PhysAddress', 'DisplayString']}Related source files and packages:
Vendor MIB copy from the LibreNMS archive.
Module: LSI-MegaRAID-SAS-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['private', 'enterprises', 'Counter', 'Gauge'], 'RFC1213-MIB': ['PhysAddress', 'DisplayString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1 | pdIndex | 0 | 0 | The unique ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.2 | physDevID | 0 | 0 | The Device ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.3 | oemSupported | 0 | 0 | Is the drive supported by the OEM (OEM-specific checks). Values: notSupported(1), supported(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.4 | scsiDevType | 0 | 0 | Type of this Device. Values: disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unkno… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.5 | connectedAdapterPort | 0 | 0 | Adapter port(s) to which the device is connected. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.6 | deviceSpeed | 0 | 0 | Maximum supported speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.7 | mediaErrCount | 0 | 0 | Error count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.8 | otherErrCount | 0 | 0 | Other error count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.9 | predFailCount | 0 | 0 | Predictive fail count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10 | pdState | 0 | 0 | Firmware\s interpretation of drive state. Values: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.11 | disabledForRemoval | 0 | 0 | If true, drive is ready for removal. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.12 | linkSpeed | 0 | 0 | Negotiated link speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.13 | pdSupportFlags | 0 | 0 | 1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byt… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.14 | sasAddr | 0 | 0 | Device SAS addresses. Comma separeted for multiple address |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15 | rawSize | 0 | 0 | Size(MB) before COD and coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.16 | nonCoercedSize | 0 | 0 | Size(MB) after COD is reserved but before coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.17 | coercedSize | 0 | 0 | Size(MB) after COD is reserved and after coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.18 | enclDeviceId | 0 | 0 | Enclosure\s device Id (in decimal); if device is not within enclosure value is -1 |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.20 | slotNumber | 0 | 0 | Slot number of this drive, if the Physical Disk is part of an enclosure then -1 |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.21 | operationProgress | 0 | 0 | Operation progress in %. e.g. Rebuild progress is 10% |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.22 | adpID-PDT | 0 | 0 | Controller id where this Physical Drive is attached |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.23 | operationSupport | 0 | 0 | MakeOnline,MakeOffline,MakeFailed,MakeBad,MakeUncofigured, MakeSpare,RemoveSpare,replaceMissing,markMissing,startRebuild, stopR… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24 | pdVendorID | 0 | 0 | Vendor ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25 | pdProductID | 0 | 0 | Product ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.26 | pdFwversion | 0 | 0 | PD firmware version |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.27 | diskType | 0 | 0 | Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.28 | partnerDevId | 0 | 0 | If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.29 | mediatype | 0 | 0 | Media Type HDD(0),SSD(1),Solid state flash module(2) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.30 | powerState | 0 | 0 | Power condition of the device. Values are device is active(0),device is stopped(1),device is transitioning between power states… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.31 | secured | 0 | 0 | 1=drive is secured, 0=not secured |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.32 | locked | 0 | 0 | 1=drive is locked, 0=unlocked |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.33 | foreign | 0 | 0 | 1=drive is secured by a foreign lock key, 0=drive is not secured by a foreign lock key |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.34 | oemCertified | 0 | 0 | Is the drive certified by the OEM (OEM-specific checks). Values: notCertified(1), Certified(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.35 | foreignImportNotAllowed | 0 | 0 | 1=Drive is not allowed foreignImport operation, 0=Drive is allowed foreignImport operation |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.36 | pdTemperature | 0 | 0 | Physical Drive temperature in Celsius |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.37 | pdSerialNumber | 0 | 0 | Physical Drives serial number |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.38 | piEligible | 0 | 0 | Protection Information eligibility.1=drive can be used for PD Enabled LD , 0=drive can\t be used for PD Enabled LD |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.39 | piType | 0 | 0 | SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.40 | piFormatted | 0 | 0 | formatted for PI information. 1=drive is formatted for PI information, 0=no PI data. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.41 | userDataBlockSize | 0 | 0 | Number of bytes of user data in LBA |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.42 | commissionedSpare | 0 | 0 | Yes = this PD is a commissioned spare, No = this PD is not a commissioned spare. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.43 | emergencySpare | 0 | 0 | Eligible = this PD is a emergency spare, Ineligible = this PD is not a emergency spare. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.44 | shieldCounter | 0 | 0 | How many times the shield diagnostics was run before it was marked failed |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.45 | shieldDiagCompletionTime | 0 | 0 | Last successful Diagnostics completion time. 0 is N/A |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.46 | ineligibleForSSCD | 0 | 0 | Whether PD cannot be used for an SSCD. PD can not be used for an SSCD(1), PD can be used for an SSCD(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.47 | ineligibleForLd | 0 | 0 | Whether PD cannot be used for a regular LD. PD can not be used for a regular LD(1), PD can be used for a regular LD(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.48 | serviceable | 0 | 0 |