| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.1 |
virtualDevID | 0 | 0 |
The unique Virtual Drives ID |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.2 |
size | 0 | 0 |
Total size in MB of the drive |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.3 |
clusterOwnerDeviceId | 0 | 0 |
VD owner\s device Id |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.4 |
targetId | 0 | 0 |
Virtual Drive target id (i.e. 0 to 63) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.5 |
state | 0 | 0 |
The Device state: Values: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.6 |
name | 0 | 0 |
Virtual Drive name |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.7 |
defaultCachePolicy | 0 | 0 |
Default cache policy settings. Values: WriteBack, WriteThrough, ReadAdaptive, ReadAhead, ReadAheadNone, Cached, Direct, Write C… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.8 |
accessPolicy | 0 | 0 |
Access policy settings. Values: access-rw(0), access-read-only(2), access-blocked(3) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.9 |
diskCachePolicy | 0 | 0 |
Physical disk cache policy. Values: unchanged(0),enable(1),disable(2) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.10 |
bgiState | 0 | 0 |
Disable/Enable Back Groung Initialization on this Virtual Drive. Values: disable(1),enable(0) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.11 |
prl | 0 | 0 |
Primay raid level. Values: 0(RAID-0), 1(RAID-1), 3(RAID-3), 4(RAID-4), 5(RAID-5), 6(RAID-6),15(Single Disk or JBOD), 17(RAID-1E… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.12 |
rLQ | 0 | 0 |
Raid level qualifier |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.13 |
sRL | 0 | 0 |
Secondary raid level. Values: 0(Stripped), 1(Mirrored), 2(Concatenated), 3(Spanned) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.14 |
stripeSize | 0 | 0 |
Stripe Size. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.15 |
numDrives | 0 | 0 |
Number of drivers per span |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.16 |
spanDepth | 0 | 0 |
Number of spans. If only one array then it is considered as 1 span |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.17 |
initState | 0 | 0 |
0=no init, 1=quick init, 2=full init |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.18 |
vdOperationProgress | 0 | 0 |
Progress % for an operation / No operation in progress |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.19 |
currentCachePolicy | 0 | 0 |
Cache policy settings. Values:WriteBack, WriteThrough, ReadAdaptive, ReadAhead, ReadAheadNone, Cached, Direct, Write Cache OK i… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.21 |
encryptionType | 0 | 0 |
logical drive encryption type. Values No Encryption(0), FDE drive encryption(1), Controller-based encryption(2) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.22 |
vdOperationSupport | 0 | 0 |
startFGI,stopFGI,startCC,stopCC,startRecon,deleteLD |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.23 |
badBlocksExist | 0 | 0 |
0 = LD bad block table is empty, 1 = LD bad block table is not empty |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.24 |
defaultPSPolicy | 0 | 0 |
Power Savings policy set for this LD.Values:controller default power saving policy=0, AUTO=1, MAX=2, MAX with no cache=6, NONE=… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.25 |
currentPSPolicy | 0 | 0 |
Power Savings policy set for this LD.Values:controller default power saving policy=0, AUTO=1, MAX=2, MAX with no cache=6, NONE=… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.26 |
breakMirror | 0 | 0 |
Break Mirror Policy set for this LD.Values:1=break mirror is allowed, 0=break mirror not is allowed |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.27 |
joinMirror | 0 | 0 |
Join Mirror policy set for this LD.Values:1=join mirror is allowed, 0=join mirror not is allowed |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.28 |
mirrorPdInfo | 0 | 0 |
Mirror Info Property give the Information about mirror of PD and PD state respectively. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.29 |
vdPiType | 0 | 0 |
Information about logical drive protection type . No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Ty… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.30 |
mirrorDataSize | 0 | 0 |
Total Space used for mirrorData or Parity information |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.31 |
cacheCadeType | 0 | 0 |
0= Non-CacheCade VD, 1= CacheCade Type is Read & Write, 2= CacheCade Type is Read only, 3= R1-EC |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.32 |
currentWritePolicy | 0 | 0 |
Current write policy settings. Values: WriteBack, WriteThrough, AlwaysWriteBack |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.33 |
defaultWritePolicy | 0 | 0 |
Default write policy settings. Values: WriteBack, WriteThrough, AlwaysWriteBack |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.34 |
associatedVD | 0 | 0 |
This property gives the Information about VD is Cached or VD is not cached. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.35 |
hostAccessPolicy | 0 | 0 |
This property gives the Host Access Policy |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.36 |
guid | 0 | 0 |
This property gives the LD GUID. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.37 |
fastPathWBEnabled | 0 | 0 |
|
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.38 |
peerHasNoAccess | 0 | 0 |
|