| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.1 |
pdIndex | 0 | 0 |
The unique ID |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.2 |
physDevID | 0 | 0 |
The Device ID |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.3 |
oemSupported | 0 | 0 |
Drive support by the OEM (OEM-specific checks) Values: notSupported(1), supported(0) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.4 |
scsiDevType | 0 | 0 |
Type of this Device. Values: disk(0), tape(1), printer(2), processor(3), cdrom(5), scanner(6), optical(7), enclosure(13), dvd(1… |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.5 |
connectedAdapterPort | 0 | 0 |
Adapter port to which the device is connected. |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.6 |
deviceSpeed | 0 | 0 |
Maximum supported speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2),speed_6G(3) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.7 |
mediaErrCount | 0 | 0 |
Error count of the device |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.8 |
otherErrCount | 0 | 0 |
other error count of the device |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.9 |
predFailCount | 0 | 0 |
Predictive fail count of the device |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.10 |
pdState | 0 | 0 |
Firmware\s interpretation of drive state. Values: unconfigured_good(0), unconfigured_bad(1), hot_spare(2), offline(16), failed(… |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.11 |
disabledForRemoval | 0 | 0 |
If true, drive is ready for removal. Values: false(0), true(1) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.12 |
linkSpeed | 0 | 0 |
Negotiated link speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2), speed_6G(3) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.13 |
pdSupportFlags | 0 | 0 |
1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byt… |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.14 |
pdSasAddr | 0 | 0 |
Device SAS addresses. Comma separeted for multiple address |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.15 |
rawSize | 0 | 0 |
Size(MB) before COD and coercion |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.16 |
nonCoercedSize | 0 | 0 |
Size(MB) after COD is reserved but before coercion |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.17 |
coercedSize | 0 | 0 |
Size(MB) after COD is reserved and after coercion |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.18 |
enclDeviceId | 0 | 0 |
Enclosure\s device Id (in decimal); if device is not within enclosure value is -1 |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.19 |
enclIndex | 0 | 0 |
Firmware internal enclosure index |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.20 |
slotNumber | 0 | 0 |
Slot number of this drive, if this Physical Drive is an enclosure then -1 |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.21 |
pdOperationProgress | 0 | 0 |
% Progress is %. e.g. Rebuild progress is 10% |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.22 |
pdAdpID | 0 | 0 |
Controller id where this Physical Drive is attached |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.24 |
vendorID | 0 | 0 |
Vendor ID |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.25 |
productID | 0 | 0 |
Product ID |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.26 |
pdFwversion | 0 | 0 |
Physical drive firmware version |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.27 |
pdSerialNumber | 0 | 0 |
Physical drive serial number |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.28 |
diskType | 0 | 0 |
Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.29 |
partnerDevId | 0 | 0 |
If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.30 |
mediatype | 0 | 0 |
Media Type HDD(0),SSD(1) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.31 |
oemCertified | 0 | 0 |
Indicates whether device is certified(0) or not(1) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.32 |
pdTemperature | 0 | 0 |
Physical Drive temperature in Celsius |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.33 |
piType | 0 | 0 |
SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved… |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.34 |
userDataBlockSize | 0 | 0 |
Number of bytes of user data in LBA |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.35 |
cage | 0 | 0 |
Current Cage that holds the SSD |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.36 |
location | 0 | 0 |
Current location of SSD 0 - Upper, 1 - Lower |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.37 |
whtemperature | 0 | 0 |
Temperature of each SSD |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.38 |
flashType | 0 | 0 |
Flash Type being used (SLC / MLC / EMLC) |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.39 |
lifeCurveStatus | 0 | 0 |
100 - No throttling being done, 90 - SSD is being throttled |
| 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.40 |
sSDLifeLeft | 0 | 0 |
Percentage of SSD life left |