OID reference

saFSAction

1.3.6.1.4.1.3833.1.1.14.2.4.6

Description

This object, when read, always returns a value of other(1). When set to update(2), the updatefile specified by saFSUpdFileName will be loaded. config-load(3) will load the configuration stored in the local flash. config-save (4) will write the present configuration to the flash. config-load-remote (5) will load the co…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.3833.1.1.14.2.4 (saFSTable)
Node code
6
Node name
saFSAction
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.3833.1.1.14.2.4.6
URN notation
urn:oid:1.3.6.1.4.1.3833.1.1.14.2.4.6
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 3833 1 1 14 2 4 6}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schneiderElectric(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schneiderElectric(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) groupeschneider(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) groupeschneider(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schneiderelectric(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schneiderelectric(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schneiderElectric(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schneiderElectric(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) groupeschneider(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) groupeschneider(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schneiderelectric(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schneiderelectric(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) schneiderElectric(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) schneiderElectric(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) groupeschneider(3833) transparentFactoryEthernet(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) groupeschneider(3833) schneiderEnergy(1) switch(1) saConfiguration(14) saAgent(2) saFSTable(4) saFSAction(6)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/3833/1/1/14/2/4/6
  • /ISO/Identified-Organization/6/1/4/1/3833/1/1/14/2/4/6
  • /ISO/3/6/1/4/1/3833/1/1/14/2/4/6
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/schneiderElectric/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprise/schneiderElectric/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprise/groupeschneider/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprise/groupeschneider/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprise/schneiderelectric/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprise/schneiderelectric/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/schneiderElectric/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/schneiderElectric/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/groupeschneider/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/groupeschneider/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/schneiderelectric/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/enterprises/schneiderelectric/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/schneiderElectric/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/schneiderElectric/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/groupeschneider/transparentFactoryEthernet/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/groupeschneider/schneiderEnergy/switch/saConfiguration/saAgent/saFSTable/saFSAction
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Enumerated values

ValueName
1other
2update
3config-load
4config-save
5config-load-remote
6config-save-remote
7log-save
8config-load-default
9set-to-factory
10log-clear
12gbl-update
13config-load-backup
15config-remote-and-save
20toggleImage

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.3833.1.1.14.2.4.6.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

saFSAction	 OBJECT-TYPE
			 SYNTAX 		 INTEGER {
							 other (1),
							 update (2),
							 config-load (3),
							 config-save (4),
							 config-load-remote (5),
							 config-save-remote (6),
							 log-save (7),
							 config-load-default (8),
							 set-to-factory(9),
                             log-clear(10),
							 gbl-update (12),
							 config-load-backup (13),
							 config-remote-and-save (15),
							 toggleImage(20)							 
							 }
			 ACCESS 		 read-write
			 STATUS 		 mandatory
			 DESCRIPTION
				 "This object, when read, always returns a value of other(1).
				 When set to update(2), the updatefile specified by
				 saFSUpdFileName will be loaded. config-load(3) will load the
				 configuration stored in the local flash. config-save (4) will
				 write the present configuration to the flash.
				 config-load-remote (5) will load the configuration stored in
				 a file specified by saFSConfigFileName. config-save-remote(6)
				 will save the present configuration in a file specified by
				 saFSConfigFileName.
				 log-save(7) will save the local logfile to a file specified
				 with saFSLogFileName. config-load-default(8) will restore the
				 default settings and set-to-factory(9) will apply the factory 
				 settings to the system and save the configuration to flash.
                 log-clear(10) will clear the logfile of the agent.
                 gbl-update(12) will perform a software update of the whole chassis.
                 config-load-backup (13) loads an automatically saved backup configuration
                 config-remote-and-save (15) loads a configuration via tftp and saves it 
                 to the flash. toggleImage(20) switches between main and backup
                 software image to be active (so it will be loaded after the next coldstart).
				 Any other value results in a badValue status code."
			 ::= { saFSTable 6 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object, when read, always returns a value of other(1). When set to update(2), the updatefile specified by saFSUpdFileName will be loaded. config-load(3) will load the configuration stored in the local flash. config-save (4) will write the present configuration to the flash. config-load-remote (5) will load the configuration stored in a file specified by saFSConfigFileName. config-save-remote(6) will save the present configuration in a file specified by saFSConfigFileName. log-save(7) will save the local logfile to a file specified with saFSLogFileName. config-load-default(8) will restore the default settings and set-to-factory(9) will apply the factory settings to the system and save the configuration to flash. log-clear(10) will clear the logfile of the agent. gbl-update(12) will perform a software update of the whole chassis. config-load-backup (13) loads an automatically saved backup configuration config-remote-and-save (15) loads a configuration via tftp and saves it to the flash. toggleImage(20) switches between main and backup software image to be active (so it will be loaded after the next coldstart). Any other value results in a badValue status code.

Sources for this description

Schneider Electric Transparent Factory official MIB

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Schneider Electric Transparent Factory official MIB1 record · 1 source

Description 1

saFSAction · mandatorySchneider Electric Transparent Factory official MIB1 source

Status in source: mandatory.

Names: saFSAction

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "saFSAction",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "update",
    "(",
    "2",
    ")",
    ",",
    "config-load",
    "(",
    "3",
    ")",
    ",",
    "config-save",
    "(",
    "4",
    ")",
    ",",
    "config-load-remote",
    "(",
    "5",
    ")",
    ",",
    "config-save-remote",
    "(",
    "6",
    ")",
    ",",
    "log-save",
    "(",
    "7",
    ")",
    ",",
    "config-load-default",
    "(",
    "8",
    ")",
    ",",
    "set-to-factory",
    "(",
    "9",
    ")",
    ",",
    "log-clear",
    "(",
    "10",
    ")",
    ",",
    "gbl-update",
    "(",
    "12",
    ")",
    ",",
    "config-load-backup",
    "(",
    "13",
    ")",
    ",",
    "config-remote-and-save",
    "(",
    "15",
    ")",
    ",",
    "toggleImage",
    "(",
    "20",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"This object, when read, always returns a value of other(1). When set to update(2), the updatefile specified by saFSUpdFileName will be loaded. config-load(3) will load the configuration stored in the local flash. config-save (4) will write the present configuration to the flash. config-load-remote (5) will load the configuration stored in a file specified by saFSConfigFileName. config-save-remote(6) will save the present configuration in a file specified by saFSConfigFileName. log-save(7) will save the local logfile to a file specified with saFSLogFileName. config-load-default(8) will restore the default settings and set-to-factory(9) will apply the factory settings to the system and save the configuration to flash. log-clear(10) will clear the logfile of the agent. gbl-update(12) will perform a software update of the whole chassis. config-load-backup (13) loads an automatically saved backup configuration config-remote-and-save (15) loads a configuration via tftp and saves it to the flash. toggleImage(20) switches between main and backup software image to be active (so it will be loaded after the next coldstart). Any other value results in a badValue status code.\"",
    "::=",
    "{",
    "saFSTable",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "update",
            2
          ],
          [
            "config-load",
            3
          ],
          [
            "config-save",
            4
          ],
          [
            "config-load-remote",
            5
          ],
          [
            "config-save-remote",
            6
          ],
          [
            "log-save",
            7
          ],
          [
            "config-load-default",
            8
          ],
          [
            "set-to-factory",
            9
          ],
          [
            "log-clear",
            10
          ],
          [
            "gbl-update",
            12
          ],
          [
            "config-load-backup",
            13
          ],
          [
            "config-remote-and-save",
            15
          ],
          [
            "toggleImage",
            20
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "This object, when read, always returns a value of other(1). When set to update(2), the updatefile specified by saFSUpdFileName will be loaded. config-load(3) will load the configuration stored in the local flash. config-save (4) will write the present configuration to the flash. config-load-remote (5) will load the configuration stored in a file specified by saFSConfigFileName. config-save-remote(6) will save the present configuration in a file specified by saFSConfigFileName. log-save(7) will save the local logfile to a file specified with saFSLogFileName. config-load-default(8) will restore the default settings and set-to-factory(9) will apply the factory settings to the system and save the configuration to flash. log-clear(10) will clear the logfile of the agent. gbl-update(12) will perform a software update of the whole chassis. config-load-backup (13) loads an automatically saved backup configuration config-remote-and-save (15) loads a configuration via tftp and saves it to the flash. toggleImage(20) switches between main and backup software image to be active (so it will be loaded after the next coldstart). Any other value results in a badValue status code."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.3833)

Dube Dennis

Siblings (11)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.3833.1.1.14.2.4.1 saFSUpdFileName00
1.3.6.1.4.1.3833.1.1.14.2.4.2 saFSConfFileName00
1.3.6.1.4.1.3833.1.1.14.2.4.3 saFSLogFileName00
1.3.6.1.4.1.3833.1.1.14.2.4.4 saFSUserName00
1.3.6.1.4.1.3833.1.1.14.2.4.5 saFSTPPassword00
1.3.6.1.4.1.3833.1.1.14.2.4.8 saFSActionResult00
1.3.6.1.4.1.3833.1.1.14.2.4.9 saFSBootConfiguration00
1.3.6.1.4.1.3833.1.1.14.2.4.10 saFSRunningConfiguration00
1.3.6.1.4.1.3833.1.1.14.2.4.11 saFSLastMessage00
1.3.6.1.4.1.3833.1.1.14.2.4.100 saFSFileTable15
1.3.6.1.4.1.3833.1.1.14.2.4.200 saBackUpConfigGroup11