The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay
Sources for this description
Schneider Electric Transparent Factory official MIB
OID reference
1.3.6.1.4.1.3833.1.3.6.1.2
The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay
Identification
{1 3 6 1 4 1 3833 1 3 6 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | nok the device is not responding in the specified delay | 1, 2 |
| 2 | ok the device is responding in the specified delay | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In TFPRIVATE-MIB, the row index ioScanDeviceRemAddress is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.3833.1.3.6.1.2.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3833.1.3.6.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
ioScanDeviceHealth OBJECT-TYPE
SYNTAX INTEGER {
nok (1), -- the device is not responding in the specified delay
ok (2) -- the device is responding in the specified delay
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health status of the remote Device:
nok (1), -- the device is not responding in the specified delay
ok (2) -- the device is responding in the specified delay
"
::= { ioScanDeviceEntry 2 }ioScanDeviceHealth OBJECT-TYPE
SYNTAX INTEGER {
nok (1), -- the device is not responding in the specified delay
ok (2) -- the device is responding in the specified delay
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The health status of the remote Device:
nok (1), -- the device is not responding in the specified delay
ok (2) -- the device is responding in the specified delay
"
::= { ioScanDeviceEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay
Schneider Electric Transparent Factory official MIB
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: ioScanDeviceHealth
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ioScanDeviceHealth",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"nok",
"(",
"1",
")",
",",
"ok",
"(",
"2",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay \"",
"::=",
"{",
"ioScanDeviceEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"nok",
1
],
[
"ok",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay"
],
null,
null,
null,
null
]
}Module: TFPRIVATE-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'BRIDGE-MIB': ['BridgeId', 'dot1dStaticAddress'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'TimeTicks', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'mib-2'], 'Q-BRIDGE-MIB': ['VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType']}Source data warning: Official Schneider Electric MIB distributed in the M580 support package. The package contains distinct historical editions; applicability to a specific device or firmware is not established by this file alone.
· Download Schneider Electric SchneiderTFE-V01-04.mib — M580 support packageRelated source files and packages:
Status in source: current.
Names: ioScanDeviceHealth
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ioScanDeviceHealth",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"nok",
"(",
"1",
")",
",",
"ok",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay \"",
"::=",
"{",
"ioScanDeviceEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"nok",
1
],
[
"ok",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The health status of the remote Device: nok (1), -- the device is not responding in the specified delay ok (2) -- the device is responding in the specified delay"
],
null,
null,
null,
null
]
}Module: TFPRIVATE-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Counter32']}Source data warning: Official Schneider Electric MIB distributed in the M580 support package. The package contains distinct historical editions; applicability to a specific device or firmware is not established by this file alone.
· Download Schneider Electric SchneiderTFE_V03.01.mib — M580 support packageRegistration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3833.1.3.6.1.1 | ioScanDeviceRemAddress | 0 | 0 | |
| 1.3.6.1.4.1.3833.1.3.6.1.3 | ioScanDeviceRate | 0 | 0 | |
| 1.3.6.1.4.1.3833.1.3.6.1.4 | ioScanInputLocalAddress | 0 | 0 | |
| 1.3.6.1.4.1.3833.1.3.6.1.5 | ioScanOutputLocalAddress | 0 | 0 |