OID reference
1.3.6.1.4.1.3902.1012.3.30.8.1.4
This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The value is set to 0x02 if the mapper is directly associated with a PPTP Ethernet UNI. The value is set to 0x03 if the mapper is directly associated with an IP Host …
Identification
{1 3 6 1 4 1 3902 1012 3 30 8 1 4}
| Value | Name |
|---|---|
| 1 | bridging-mapping |
| 2 | ethernet |
| 3 | ip-host-service |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ZXGPON-SERVICE-MIB, the row index consists of these components in order:
zxGponMgmtPonOltId (INTEGER): one numeric subidentifier for the non-negative value.zxGponMgmtPonOnuId (INTEGER): one numeric subidentifier for the non-negative value.zxGponPPTPEthInfoTPID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.3902.1012.3.30.8.1.4.<zxGponMgmtPonOltId>.<zxGponMgmtPonOnuId>.<zxGponPPTPEthInfoTPID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1012.3.30.8.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxGponGemPort8021pMapperTPType OBJECT-TYPE
SYNTAX INTEGER{
bridging-mapping(1),
ethernet(2),
ip-host-service(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute identifies the type of termination point associated with the mapper.
The value is set to 0x01 if the mapper is used for Bridging-mapping.
The value is set to 0x02 if the mapper is directly associated with a PPTP Ethernet UNI.
The value is set to 0x03 if the mapper is directly associated with an IP Host Service.
The value 0x03 is reserved for future standardization, which will not be shown in NMS."
REFERENCE
"G.983.2 Rev Section 7.3.95"
::= { zxGponGemPort8021pEntry 4}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The value is set to 0x02 if the mapper is directly associated with a PPTP Ethernet UNI. The value is set to 0x03 if the mapper is directly associated with an IP Host Service. The value 0x03 is reserved for future standardization, which will not be shown in NMS.
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: zxGponGemPort8021pMapperTPType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxGponGemPort8021pMapperTPType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"bridging-mapping",
"(",
"1",
")",
",",
"ethernet",
"(",
"2",
")",
",",
"ip-host-service",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The value is set to 0x02 if the mapper is directly associated with a PPTP Ethernet UNI. The value is set to 0x03 if the mapper is directly associated with an IP Host Service. The value 0x03 is reserved for future standardization, which will not be shown in NMS.\"",
"REFERENCE",
"\"G.983.2 Rev Section 7.3.95\"",
"::=",
"{",
"zxGponGemPort8021pEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"bridging-mapping",
1
],
[
"ethernet",
2
],
[
"ip-host-service",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The value is set to 0x02 if the mapper is directly associated with a PPTP Ethernet UNI. The value is set to 0x03 if the mapper is directly associated with an IP Host Service. The value 0x03 is reserved for future standardization, which will not be shown in NMS."
],
[
"REFERENCE",
"G.983.2 Rev Section 7.3.95"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZXGPON-SERVICE-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'MacAddress', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Counter64', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['ifIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1012.3.30.8.1.1 | zxGponGemPort8021pMapperUntagFrmInd | 0 | 0 | |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.2 | zxGponGemPort8021pMapperDscpTo8021pPri | 0 | 0 | |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.3 | zxGponGemPort8021pMapperDefaultPri | 0 | 0 |