When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will be shut down automatically after port loopback was detected.
Sources for this description
ZTE MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.3902.1015.1010.1.1.1.42.1.2
When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will be shut down automatically after port loopback was detected.
Identification
{1 3 6 1 4 1 3902 1015 1010 1 1 1 42 1 2}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ZXANEPON-ONUMGMT-MIB, the row index consists of these components in order:
zxAnEponOnuIfIndex (INTEGER): one numeric subidentifier for the non-negative value.zxAnEponOnuPortId (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.3902.1015.1010.1.1.1.42.1.2.<zxAnEponOnuIfIndex>.<zxAnEponOnuPortId>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1015.1010.1.1.1.42.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxAnEponOnuPortLoopbackAutoSdEn OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will
be shut down automatically after port loopback was detected."
DEFVAL { disabled }
::= { zxAnEponOnuPortEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will be shut down automatically after port loopback was detected.
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: zxAnEponOnuPortLoopbackAutoSdEn
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxAnEponOnuPortLoopbackAutoSdEn",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will be shut down automatically after port loopback was detected.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"zxAnEponOnuPortEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When zxAnEponOnuPortLoopbackAutoSdEn is enabled, port will be shut down automatically after port loopback was detected."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZXANEPON-ONUMGMT-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter64'], 'RFC1213-MIB': ['DisplayString'], 'ZTE-MASTER-MIB': ['zxAnEponMib']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1010.1.1.1.42.1.1 | zxAnEponOnuPortLoopbackDetectStatus | 0 | 0 |