OID reference
1.3.6.1.4.1.3955.1000.203.19.1.2
Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in Bridge Mode; Otherwise, the AP will operate in the normal default mode.
Identification
{1 3 6 1 4 1 3955 1000 203 19 1 2}
| Value | Name |
|---|---|
| 1 | up |
| 2 | down |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.3955.1000.203.19.1.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
apWgBridgeMode OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in
Bridge Mode; Otherwise, the AP will operate in the normal default mode."
DEFVAL { down }
::= { apWgBridgeEntry 2}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in Bridge Mode; Otherwise, the AP will operate in the normal default mode.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: apWgBridgeMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"apWgBridgeMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"up",
"(",
"1",
")",
",",
"down",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in Bridge Mode; Otherwise, the AP will operate in the normal default mode.\"",
"DEFVAL",
"{",
"down",
"}",
"::=",
"{",
"apWgBridgeEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"up",
1
],
[
"down",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in Bridge Mode; Otherwise, the AP will operate in the normal default mode."
],
null,
null,
null,
[
"DEFVAL",
"down"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: LINKSYS-WLAN-ACCESS-POINT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'LINKSYS-WLAN-ACCESS-POINT-REF-MIB': ['smb']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3955.1000.203.19.1.1 | apWgBridgeRadioName | 0 | 0 |