Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.4115.1.3.1.1.2.3.25
Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'.
Identification
{1 3 6 1 4 1 4115 1 3 1 1 2 3 25}
| Value | Name |
|---|---|
| 0 | inhibit |
| 1 | allow |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4115.1.3.1.1.2.3.25.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
arrisCmDevTelnetAllow OBJECT-TYPE
SYNTAX INTEGER {
inhibit(0),
allow(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to allow/inhibit Telnet access. For Telnet to be allowed,
arrisCmDevTelnetEnable must also be set to 'enable'."
::= { arrisCmDevOperationalSetup 25 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: arrisCmDevTelnetAllow
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"arrisCmDevTelnetAllow",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"inhibit",
"(",
"0",
")",
",",
"allow",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'.\"",
"::=",
"{",
"arrisCmDevOperationalSetup",
"25",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"inhibit",
0
],
[
"allow",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: ARRIS-CM-DEVICE-MIB
See published definition above
{'IF-MIB': ['ifPhysAddress'], 'ARRIS-MIB': ['arrisProdIdCM'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE'], 'DOCS-IF-MIB': ['docsIfCmCmtsAddress', 'docsIfDocsisBaseCapability', 'docsIfCmStatusDocsisOperMode', 'docsIfCmStatusModulationType'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DOCS-CABLE-DEVICE-MIB': ['docsDevEvLevel', 'docsDevEvId', 'docsDevEvText']}Related source files and packages:
Registration