OID reference

sipCfgPortMaxT38HSRedLevel

1.3.6.1.4.1.4115.11.1.1.1.17

Description

This MIB is used to set the maximum high-speed redundancy level that will be used for T.38 fax-relay in both the send and receive direction. High speed redundancy refers to the number of additional older data packets included in each T.38 datagram when transferring fax data between endpoints. For example, if an endpoi…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.4115.11.1.1.1 (sipCfgPortEntry)
Node code
17
Node name
sipCfgPortMaxT38HSRedLevel
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.4115.11.1.1.1.17
URN notation
urn:oid:1.3.6.1.4.1.4115.11.1.1.1.17
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 4115 11 1 1 1 17}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) arris(4115) arrisSipMib(11) sipConfiguration(1) sipCfgPortTable(1) sipCfgPortEntry(1) sipCfgPortMaxT38HSRedLevel(17)}
OID-IRI notation
  • /1/3/6/1/4/1/4115/11/1/1/1/17
  • /ISO/Identified-Organization/6/1/4/1/4115/11/1/1/1/17
  • /ISO/3/6/1/4/1/4115/11/1/1/1/17
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/enterprise/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/enterprises/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/enterprises/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/vendor-objects/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/identified-organization/dod/internet/private/vendor-objects/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/enterprise/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/enterprise/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/enterprises/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/enterprises/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/ldap-enterprise/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/ldap-enterprise/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/vendor-objects/4115/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • /iso/org/dod/internet/private/vendor-objects/arris/arrisSipMib/sipConfiguration/sipCfgPortTable/sipCfgPortEntry/sipCfgPortMaxT38HSRedLevel
  • Additional combinations skipped.

SNMP properties

Value type
Integer32
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
1
Allowed ranges
0–2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ARRIS-SIP-MIB, the row index sipCfgPortPortNumber is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.4115.11.1.1.1.17.<sipCfgPortPortNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4115.11.1.1.1.17

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

sipCfgPortMaxT38HSRedLevel OBJECT-TYPE
 SYNTAX Integer32(0..2)
 MAX-ACCESS read-write
 STATUS current
 DESCRIPTION
  "This MIB is used to set the maximum high-speed redundancy level that will be used for 
   T.38 fax-relay in both the send and receive direction.  High speed redundancy refers 
   to the number of additional older data packets included in each T.38 datagram when 
   transferring fax data between endpoints.  For example, if an endpoint is transmitting 
   T.38 with a high-speed redundancy level of two and the current sequence number of the 
   data packet is 15, two older (i.e. previously transmitted) data packets with sequence 
   numbers 13 and 14 are included in the T.38 datagram.  In general, this makes T.38 
   data transmission much less susceptible to packet loss in the network.  This parameter 
   is configuration to restrict the amount of bandwidth used for T.38 transmission.

   Setting the maximum high-speed redundancy level does not necessarily mean that the 
   endpoint will always transmit and receive at that level.  The endpoint will attempt to 
   transmit at that level only if allowed by the remote endpoint.  During call setup the 
   remote endpoint may provide the T38FaxMaxDatagram attribute within its SDP indicating 
   the maximum datagram size that it is able to receive.  If this number is smaller than 
   is needed to transmit at the maximum level, the redundancy will be reduced accordingly.

   Likewise, the local endpoint will construct its T38FaxMaxDatagram attribute according 
   to the maximum high-speed redundancy level configured to restrict the far end from 
   sending T.38 datagram packets with a higher level of high-speed redundancy.  This does 
   not necessarily mean that the remote endpoint will transmit at the maximum high-speed 
   redundancy configured, but does guarantee that it will not transmit at a higher level.  
   The remote endpoint may be configured to transmit at a lower high-speed redundancy level, 
   or may choose to reduce the transmission speed to reduce the bandwidth consumption."
 DEFVAL { 1 }   
 ::= { sipCfgPortEntry 17 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This MIB is used to set the maximum high-speed redundancy level that will be used for T.38 fax-relay in both the send and receive direction. High speed redundancy refers to the number of additional older data packets included in each T.38 datagram when transferring fax data between endpoints. For example, if an endpoint is transmitting T.38 with a high-speed redundancy level of two and the current sequence number of the data packet is 15, two older (i.e. previously transmitted) data packets with sequence numbers 13 and 14 are included in the T.38 datagram. In general, this makes T.38 data transmission much less susceptible to packet loss in the network. This parameter is configuration to restrict the amount of bandwidth used for T.38 transmission. Setting the maximum high-speed redundancy level does not necessarily mean that the endpoint will always transmit and receive at that level. The endpoint will attempt to transmit at that level only if allowed by the remote endpoint. During call setup the remote endpoint may provide the T38FaxMaxDatagram attribute within its SDP indicating the maximum datagram size that it is able to receive. If this number is smaller than is needed to transmit at the maximum level, the redundancy will be reduced accordingly. Likewise, the local endpoint will construct its T38FaxMaxDatagram attribute according to the maximum high-speed redundancy level configured to restrict the far end from sending T.38 datagram packets with a higher level of high-speed redundancy. This does not necessarily mean that the remote endpoint will transmit at the maximum high-speed redundancy configured, but does guarantee that it will not transmit at a higher level. The remote endpoint may be configured to transmit at a lower high-speed redundancy level, or may choose to reduce the transmission speed to reduce the bandwidth consumption.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

sipCfgPortMaxT38HSRedLevel · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: sipCfgPortMaxT38HSRedLevel

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sipCfgPortMaxT38HSRedLevel",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "2",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This MIB is used to set the maximum high-speed redundancy level that will be used for T.38 fax-relay in both the send and receive direction. High speed redundancy refers to the number of additional older data packets included in each T.38 datagram when transferring fax data between endpoints. For example, if an endpoint is transmitting T.38 with a high-speed redundancy level of two and the current sequence number of the data packet is 15, two older (i.e. previously transmitted) data packets with sequence numbers 13 and 14 are included in the T.38 datagram. In general, this makes T.38 data transmission much less susceptible to packet loss in the network. This parameter is configuration to restrict the amount of bandwidth used for T.38 transmission. Setting the maximum high-speed redundancy level does not necessarily mean that the endpoint will always transmit and receive at that level. The endpoint will attempt to transmit at that level only if allowed by the remote endpoint. During call setup the remote endpoint may provide the T38FaxMaxDatagram attribute within its SDP indicating the maximum datagram size that it is able to receive. If this number is smaller than is needed to transmit at the maximum level, the redundancy will be reduced accordingly. Likewise, the local endpoint will construct its T38FaxMaxDatagram attribute according to the maximum high-speed redundancy level configured to restrict the far end from sending T.38 datagram packets with a higher level of high-speed redundancy. This does not necessarily mean that the remote endpoint will transmit at the maximum high-speed redundancy configured, but does guarantee that it will not transmit at a higher level. The remote endpoint may be configured to transmit at a lower high-speed redundancy level, or may choose to reduce the transmission speed to reduce the bandwidth consumption.\"",
    "DEFVAL",
    "{",
    "1",
    "}",
    "::=",
    "{",
    "sipCfgPortEntry",
    "17",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This MIB is used to set the maximum high-speed redundancy level that will be used for T.38 fax-relay in both the send and receive direction. High speed redundancy refers to the number of additional older data packets included in each T.38 datagram when transferring fax data between endpoints. For example, if an endpoint is transmitting T.38 with a high-speed redundancy level of two and the current sequence number of the data packet is 15, two older (i.e. previously transmitted) data packets with sequence numbers 13 and 14 are included in the T.38 datagram. In general, this makes T.38 data transmission much less susceptible to packet loss in the network. This parameter is configuration to restrict the amount of bandwidth used for T.38 transmission. Setting the maximum high-speed redundancy level does not necessarily mean that the endpoint will always transmit and receive at that level. The endpoint will attempt to transmit at that level only if allowed by the remote endpoint. During call setup the remote endpoint may provide the T38FaxMaxDatagram attribute within its SDP indicating the maximum datagram size that it is able to receive. If this number is smaller than is needed to transmit at the maximum level, the redundancy will be reduced accordingly. Likewise, the local endpoint will construct its T38FaxMaxDatagram attribute according to the maximum high-speed redundancy level configured to restrict the far end from sending T.38 datagram packets with a higher level of high-speed redundancy. This does not necessarily mean that the remote endpoint will transmit at the maximum high-speed redundancy configured, but does guarantee that it will not transmit at a higher level. The remote endpoint may be configured to transmit at a lower high-speed redundancy level, or may choose to reduce the transmission speed to reduce the bandwidth consumption."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      1
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.4115)

Wynn Robert

Siblings (27)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.4115.11.1.1.1.1 sipCfgPortPortNumber00
1.3.6.1.4.1.4115.11.1.1.1.2 sipCfgPortUserName00
1.3.6.1.4.1.4115.11.1.1.1.3 sipCfgPortDisplayName00
1.3.6.1.4.1.4115.11.1.1.1.4 sipCfgPortLogin00
1.3.6.1.4.1.4115.11.1.1.1.5 sipCfgPortPassword00
1.3.6.1.4.1.4115.11.1.1.1.6 sipCfgPortWarmOrHotlineNumber00
1.3.6.1.4.1.4115.11.1.1.1.7 sipCfgPortWarmLineTimeout00
1.3.6.1.4.1.4115.11.1.1.1.8 sipCfgPortRegistrarAdr00
1.3.6.1.4.1.4115.11.1.1.1.9 sipCfgPortRegistrarPort00
1.3.6.1.4.1.4115.11.1.1.1.10 sipCfgPortRegistrarType00
1.3.6.1.4.1.4115.11.1.1.1.11 sipCfgPortProxyAdr00
1.3.6.1.4.1.4115.11.1.1.1.12 sipCfgPortProxyPort00
1.3.6.1.4.1.4115.11.1.1.1.13 sipCfgPortProxyType00
1.3.6.1.4.1.4115.11.1.1.1.14 sipCfgPortFeatureSettings00
1.3.6.1.4.1.4115.11.1.1.1.15 sipCfgPortT38Mode00
1.3.6.1.4.1.4115.11.1.1.1.16 sipCfgPortFaxOnlyTimeout00
1.3.6.1.4.1.4115.11.1.1.1.18 sipCfgPortCallByeDelay00
1.3.6.1.4.1.4115.11.1.1.1.19 sipCfgPortMWIClear00
1.3.6.1.4.1.4115.11.1.1.1.20 sipCfgPortMWIVisualEnable00
1.3.6.1.4.1.4115.11.1.1.1.21 sipCfgPortMWIToneEnable00
1.3.6.1.4.1.4115.11.1.1.1.22 sipCfgPortWarmOrHotlineEnable00
1.3.6.1.4.1.4115.11.1.1.1.23 sipCfgPortDndRingReminderEnable00
1.3.6.1.4.1.4115.11.1.1.1.24 sipCfgPortLoopReversal00
1.3.6.1.4.1.4115.11.1.1.1.25 sipCfgPortCurrentProxy00
1.3.6.1.4.1.4115.11.1.1.1.26 sipCfgPortPrimaryProxy00
1.3.6.1.4.1.4115.11.1.1.1.27 sipCfgPortCallWaitingPermanentDisable00
1.3.6.1.4.1.4115.11.1.1.1.28 sipCfgPortCallerIDCallWaitingPermanentDisable00