Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sipCfgDialProxyMap",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"0",
".",
".",
"2048",
")",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This defines the dialed digits on a handset to the actual dialing feature that is to be handled by a SIP Proxy. It allows a dial code, a specified tone and the line bitmap. A pipe is used to designate the end of the assignment. An example would be: code, tone, active | *50,1,3|*93,2,0| code = the dial sequence for the fature on the SIP Proxy tone = the specific tone to be played when dialed active = is a UINT32 bitmask with each bit representing which line has this feature tone: 1 = studder dialtone, 2 = dialtone This example has two features. The first is when *50 is dialed tone number 1 will be played and the feature is actived on line 1 and line 2 (000 0011). The second feature is *93 that when dialed would issue a dialtone. However there are no active bits set so no lines on this box will offer this feature so it is currently disabled. NOTE: This MIB is loaded by TLV43/TLV71.\"",
"::=",
"{",
"sipConfiguration",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
0,
2048
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This defines the dialed digits on a handset to the actual dialing feature that is to be handled by a SIP Proxy. It allows a dial code, a specified tone and the line bitmap. A pipe is used to designate the end of the assignment. An example would be: code, tone, active | *50,1,3|*93,2,0| code = the dial sequence for the fature on the SIP Proxy tone = the specific tone to be played when dialed active = is a UINT32 bitmask with each bit representing which line has this feature tone: 1 = studder dialtone, 2 = dialtone This example has two features. The first is when *50 is dialed tone number 1 will be played and the feature is actived on line 1 and line 2 (000 0011). The second feature is *93 that when dialed would issue a dialtone. However there are no active bits set so no lines on this box will offer this feature so it is currently disabled. NOTE: This MIB is loaded by TLV43/TLV71."
],
null,
null,
null,
null
]
}