OID reference
1.3.6.1.4.1.43.45.1.10.2.14.10
The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop suppl…
Identification
{1 3 6 1 4 1 43 45 1 10 2 14 10}
| Value | Name |
|---|---|
| 1 | disabled |
| 2 | priority |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
h3cPDPolicyMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
priority(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PD policy only applies to the situation that when a new
PD is inserted, and the power of PSE is overload.
A value of priority(2) means that the power will stop supplying
to the low priority port PD. About port priority, please refer
to pethPsePortPowerPriority. A value of disabled(1) means that
the slot stop supplying to the new inserted PD. The default
value of this object is disabled(1)."
::= { h3cPowerEthernetExt 10 }h3cPDPolicyMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
priority(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PD policy only applies to the situation that when a new
PD is inserted, and the power of PSE is overload.
A value of priority(2) means that the power will stop supplying
to the low priority port PD. About port priority, please refer
to pethPsePortPowerPriority. A value of disabled(1) means that
the slot stop supplying to the new inserted PD. The default
value of this object is disabled(1)."
::= { h3cPowerEthernetExt 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop supplying to the new inserted PD. The default value of this object is disabled(1).
3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: h3cPDPolicyMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h3cPDPolicyMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"1",
")",
",",
"priority",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop supplying to the new inserted PD. The default value of this object is disabled(1).\"",
"::=",
"{",
"h3cPowerEthernetExt",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
1
],
[
"priority",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop supplying to the new inserted PD. The default value of this object is disabled(1)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. 3Com support.
Module: A3COM-HUAWEI-POWER-ETH-EXT-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'POWER-ETHERNET-MIB': ['pethPsePortGroupIndex', 'pethPsePortIndex', 'pethMainPseGroupIndex', 'pethPsePortDetectionStatus'], 'A3COM-HUAWEI-OID-MIB': ['h3cCommon']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: A3COM-HUAWEI-POWER-ETH-EXT-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'POWER-ETHERNET-MIB': ['pethPsePortGroupIndex', 'pethPsePortIndex', 'pethMainPseGroupIndex', 'pethPsePortDetectionStatus'], 'A3COM-HUAWEI-OID-MIB': ['h3cCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.14.1 | h3cPsePortTable | 1 | 7 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.2 | h3cMainPseTable | 1 | 8 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.3 | h3cPseAutoDetectActive | 0 | 0 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.4 | h3cPseComformance | 2 | 15 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.5 | h3cPsePowerMaxValue | 0 | 0 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.6 | h3cpseportNotification | 18 | 18 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.7 | h3cPseProfilesTable | 1 | 9 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.8 | h3cPOEPowerObjects | 7 | 61 | |
| 1.3.6.1.4.1.43.45.1.10.2.14.9 | h3cPsePolicyMode | 0 | 0 |