The total number of IPSec Phase-1 IKE Tunnels which were remotely initiated.
Sources for this description
3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.43.45.1.10.2.30.1.3.18
The total number of IPSec Phase-1 IKE Tunnels which were remotely initiated.
Identification
{1 3 6 1 4 1 43 45 1 10 2 30 1 3 18}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.43.45.1.10.2.30.1.3.18.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
h3cIKEGlobalRespTunnels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPSec Phase-1 IKE Tunnels which
were remotely initiated."
::= { h3cIKEGlobalStats 18 }h3cIKEGlobalRespTunnels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPSec Phase-1 IKE Tunnels which
were remotely initiated."
::= { h3cIKEGlobalStats 18 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The total number of IPSec Phase-1 IKE Tunnels which were remotely initiated.
3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: h3cIKEGlobalRespTunnels
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h3cIKEGlobalRespTunnels",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The total number of IPSec Phase-1 IKE Tunnels which were remotely initiated.\"",
"::=",
"{",
"h3cIKEGlobalStats",
"18",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total number of IPSec Phase-1 IKE Tunnels which were remotely initiated."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. 3Com support.
Module: A3COM-HUAWEI-IKE-MONITOR-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['IpAddress', 'Integer32', 'Counter32', 'Counter64', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Gauge32', 'NOTIFICATION-TYPE'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'A3COM-HUAWEI-OID-MIB': ['h3cCommon']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: A3COM-HUAWEI-IKE-MONITOR-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['IpAddress', 'Integer32', 'Counter32', 'Counter64', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Gauge32', 'NOTIFICATION-TYPE'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'A3COM-HUAWEI-OID-MIB': ['h3cCommon']}Related source files and packages:
Registration