OID reference

h3cEntityExtErrorStatus

1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19

Description

Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the sta…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1 (h3cEntityExtStateEntry)
Node code
19
Node name
h3cEntityExtErrorStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19
URN notation
urn:oid:1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 43 45 1 10 2 6 1 1 1 1 19}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) a3Com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) a3com(43) jv-mib(45) huawei(1) h3c(10) h3cCommon(2) h3cEntityExtend(6) h3cEntityExtObjects(1) h3cEntityExtState(1) h3cEntityExtStateTable(1) h3cEntityExtStateEntry(1) h3cEntityExtErrorStatus(19)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/43/45/1/10/2/6/1/1/1/1/19
  • /ISO/Identified-Organization/6/1/4/1/43/45/1/10/2/6/1/1/1/1/19
  • /ISO/3/6/1/4/1/43/45/1/10/2/6/1/1/1/1/19
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/enterprise/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/enterprises/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/enterprises/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/enterprise/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/enterprise/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/enterprises/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/enterprises/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/ldap-enterprise/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/ldap-enterprise/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/vendor-objects/a3Com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • /iso/org/dod/internet/private/vendor-objects/a3com/jv-mib/huawei/h3c/h3cCommon/h3cEntityExtend/h3cEntityExtObjects/h3cEntityExtState/h3cEntityExtStateTable/h3cEntityExtStateEntry/h3cEntityExtErrorStatus
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
1notSupported
2normal
3postFailure
4entityAbsent
11poeError
21stackError
22stackPortBlocked
23stackPortFailed
31sfpRecvError
32sfpSendError
33sfpBothError
41fanError
51psuError
61rpsError
71moduleFaulty
81sensorError
91hardwareFaulty

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In A3COM-HUAWEI-ENTITY-EXT-MIB, the row index h3cEntityExtPhysicalIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19.<h3cEntityExtPhysicalIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

h3cEntityExtErrorStatus · current

h3cEntityExtErrorStatus OBJECT-TYPE
        SYNTAX INTEGER
            {
            notSupported(1),
            normal(2),
            postFailure(3),
            entityAbsent(4),
            poeError(11),
            stackError(21),
            stackPortBlocked(22),
            stackPortFailed(23),
            sfpRecvError(31),
            sfpSendError(32),
            sfpBothError(33),
            fanError (41),
            psuError(51),
            rpsError(61),
            moduleFaulty(71),
            sensorError(81),
            hardwareFaulty(91)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate the error state of this entity object. Now it only
            supports Port, general power supply, RPS power supply and
            board/Subcard. It may have one of these values.
            The following four values  can be used for all kinds of entities.

            notSupported(1) means this entity can not support this function.
            normal(2) means the statement of this entity is normal. for ports,
            it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and
            half-duplex. For fan, power supply and board-Subcard, it means
            their states are normal.
            postFailure(3)  means the entity fails to POST.
            entityAbsent(4) means the entity is absent now.


            The following values is depended on the entity .

            For Port entities, it may have the following  values. If its POST
            is failure,
            then the value of the instance will be postFailure(3), otherwise
            the value will be normal(2).

            If enable power supply over Ethernet on this port is failure,
            the value of this instance will be poeError(11), otherwise it will
            be normal(2).

            For stack port, if it connects to another stack port normally, and
            these two units merge into one stack, then the value of this
            instance will be normal(2).
            If something wrong occurs and the unit can not merge into stack,
            the value of this instance will be stackPortFailed(23).  If the
            stack port forms resilient daisy chain with another stack port
            on the other unit, the value of this instance will be
            stackPortBlocked(22).


            For SFP ports, if it fail to receive, the value of this instance
            will be sfpRecvError(31), if it fail to send, the value is
            sfpSendError(32), if it fail to send and receive, the value is
            sfpBothError(33), otherwise it will be normal(2).

            fanError(41) means that the fan stops working.

            psuError(51) means that the Power Supply Unit is in the state of
            fault.

            rpsError(61) means the RPS is in the state of fault.

            moduleFaulty(71) means the Module is in the state of fault.

            sensorError(81) means the sensor is in the state of fault.

            hardwareFaulty(91) means the hardware of specified entity is in the state of fault.

            NMS must be compatible with the states which may be added
            in the future."
        ::= { h3cEntityExtStateEntry 19 }

h3cEntityExtErrorStatus · current

h3cEntityExtErrorStatus OBJECT-TYPE
        SYNTAX INTEGER
            {
            notSupported(1),
            normal(2),
            postFailure(3),
            entityAbsent(4),
            poeError(11),
            stackError(21),
            stackPortBlocked(22),
            stackPortFailed(23),
            sfpRecvError(31),
            sfpSendError(32),
            sfpBothError(33),
            fanError (41),
            psuError(51),
            rpsError(61),
            moduleFaulty(71),
            sensorError(81),
            hardwareFaulty(91)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate the error state of this entity object. Now it only
            supports Port, general power supply, RPS power supply and
            board/Subcard. It may have one of these values.
            The following four values  can be used for all kinds of entities.

            notSupported(1) means this entity can not support this function.
            normal(2) means the statement of this entity is normal. for ports,
            it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and
            half-duplex. For fan, power supply and board-Subcard, it means
            their states are normal.
            postFailure(3)  means the entity fails to POST.
            entityAbsent(4) means the entity is absent now.


            The following values is depended on the entity .

            For Port entities, it may have the following  values. If its POST
            is failure,
            then the value of the instance will be postFailure(3), otherwise
            the value will be normal(2).

            If enable power supply over Ethernet on this port is failure,
            the value of this instance will be poeError(11), otherwise it will
            be normal(2).

            For stack port, if it connects to another stack port normally, and
            these two units merge into one stack, then the value of this
            instance will be normal(2).
            If something wrong occurs and the unit can not merge into stack,
            the value of this instance will be stackPortFailed(23).  If the
            stack port forms resilient daisy chain with another stack port
            on the other unit, the value of this instance will be
            stackPortBlocked(22).


            For SFP ports, if it fail to receive, the value of this instance
            will be sfpRecvError(31), if it fail to send, the value is
            sfpSendError(32), if it fail to send and receive, the value is
            sfpBothError(33), otherwise it will be normal(2).

            fanError(41) means that the fan stops working.

            psuError(51) means that the Power Supply Unit is in the state of
            fault.

            rpsError(61) means the RPS is in the state of fault.

            moduleFaulty(71) means the Module is in the state of fault.

            sensorError(81) means the sensor is in the state of fault.

            hardwareFaulty(91) means the hardware of specified entity is in the state of fault.

            NMS must be compatible with the states which may be added
            in the future."
        ::= { h3cEntityExtStateEntry 19 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit can not merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future.

Sources for this description

3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 13Com MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies1 record · 2 sources

Description 1

h3cEntityExtErrorStatus · current3Com MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies2 sources

Status in source: current.

Names: h3cEntityExtErrorStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "h3cEntityExtErrorStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "notSupported",
    "(",
    "1",
    ")",
    ",",
    "normal",
    "(",
    "2",
    ")",
    ",",
    "postFailure",
    "(",
    "3",
    ")",
    ",",
    "entityAbsent",
    "(",
    "4",
    ")",
    ",",
    "poeError",
    "(",
    "11",
    ")",
    ",",
    "stackError",
    "(",
    "21",
    ")",
    ",",
    "stackPortBlocked",
    "(",
    "22",
    ")",
    ",",
    "stackPortFailed",
    "(",
    "23",
    ")",
    ",",
    "sfpRecvError",
    "(",
    "31",
    ")",
    ",",
    "sfpSendError",
    "(",
    "32",
    ")",
    ",",
    "sfpBothError",
    "(",
    "33",
    ")",
    ",",
    "fanError",
    "(",
    "41",
    ")",
    ",",
    "psuError",
    "(",
    "51",
    ")",
    ",",
    "rpsError",
    "(",
    "61",
    ")",
    ",",
    "moduleFaulty",
    "(",
    "71",
    ")",
    ",",
    "sensorError",
    "(",
    "81",
    ")",
    ",",
    "hardwareFaulty",
    "(",
    "91",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit can not merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future.\"",
    "::=",
    "{",
    "h3cEntityExtStateEntry",
    "19",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "notSupported",
            1
          ],
          [
            "normal",
            2
          ],
          [
            "postFailure",
            3
          ],
          [
            "entityAbsent",
            4
          ],
          [
            "poeError",
            11
          ],
          [
            "stackError",
            21
          ],
          [
            "stackPortBlocked",
            22
          ],
          [
            "stackPortFailed",
            23
          ],
          [
            "sfpRecvError",
            31
          ],
          [
            "sfpSendError",
            32
          ],
          [
            "sfpBothError",
            33
          ],
          [
            "fanError",
            41
          ],
          [
            "psuError",
            51
          ],
          [
            "rpsError",
            61
          ],
          [
            "moduleFaulty",
            71
          ],
          [
            "sensorError",
            81
          ],
          [
            "hardwareFaulty",
            91
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit can not merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.43)

Jeremy Siegel

Siblings (30)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.1 h3cEntityExtPhysicalIndex00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.2 h3cEntityExtAdminStatus00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.3 h3cEntityExtOperStatus00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.4 h3cEntityExtStandbyStatus00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.5 h3cEntityExtAlarmLight00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.6 h3cEntityExtCpuUsage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.7 h3cEntityExtCpuUsageThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.8 h3cEntityExtMemUsage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.9 h3cEntityExtMemUsageThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.10 h3cEntityExtMemSize00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.11 h3cEntityExtUpTime00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.12 h3cEntityExtTemperature00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.13 h3cEntityExtTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.14 h3cEntityExtVoltage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.15 h3cEntityExtVoltageLowThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.16 h3cEntityExtVoltageHighThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.17 h3cEntityExtCriticalTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.18 h3cEntityExtMacAddress00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.20 h3cEntityExtCpuMaxUsage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.21 h3cEntityExtLowerTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.22 h3cEntityExtShutdownTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.23 h3cEntityExtPhyMemSize00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.24 h3cEntityExtPhyCpuFrequency00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.25 h3cEntityExtFirstUsedDate00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.26 h3cEntityExtCpuAvgUsage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.27 h3cEntityExtMemAvgUsage00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.28 h3cEntityExtMemType00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.29 h3cEntityExtCriticalLowerTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.30 h3cEntityExtShutdownLowerTemperatureThreshold00
1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.31 h3cEntityExtCpuUsageRecoverThreshold00