The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.
Sources for this description
3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.43.45.1.2.34.2.1.1.19
The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.
Identification
{1 3 6 1 4 1 43 45 1 2 34 2 1 1 19}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In A3COM-HUAWEI-SNA-DLSW-MIB, the row index dlswRemotePeerAddr is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.43.45.1.2.34.2.1.1.19.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.43.45.1.2.34.2.1.1.19
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dlswRemotePeerSendPacks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Switch-to-Switch Protocol (SSP) messages
sent on this tcp transport connection."
::= { dlswRemotePeerEntry 19 }dlswRemotePeerSendPacks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Switch-to-Switch Protocol (SSP) messages
sent on this tcp transport connection."
::= { dlswRemotePeerEntry 19 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.
3Com MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dlswRemotePeerSendPacks
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dlswRemotePeerSendPacks",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.\"",
"::=",
"{",
"dlswRemotePeerEntry",
"19",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. 3Com support.
Module: A3COM-HUAWEI-SNA-DLSW-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Counter32', 'Gauge32', 'IpAddress', 'TimeTicks', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32'], 'RFC1213-MIB': ['ifIndex'], 'A3COM-HUAWEI-OID-MIB': ['hwproducts']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: A3COM-HUAWEI-SNA-DLSW-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Counter32', 'Gauge32', 'IpAddress', 'TimeTicks', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32'], 'RFC1213-MIB': ['ifIndex'], 'A3COM-HUAWEI-OID-MIB': ['hwproducts']}Related source files and packages:
Registration