port. The value 'locked' is used to stop the port, the value 'unlocked' isued to start the
port.
OID reference
1.3.6.1.4.1.434.2.2.3.2.1.7
The parameter that can be modified by the Operator in order to change the state of the port. The value 'locked' is used to stop the port, the value 'unlocked' isued to start the port.
Identification
{1 3 6 1 4 1 434 2 2 3 2 1 7}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | start | 1 |
| 2 | stop | 1 |
| 3 | dump | 1 |
| 4 | test | 1 |
| 5 | invalid | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Historical records
portAdminStateCtr OBJECT-TYPE
SYNTAX AdminState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The parameter that can be modified by the Operator in order to change the state of the
port. The value 'locked' is used to stop the port, the value 'unlocked' isued to start the
port."
::= { portEntry 7 }
portAdminStateCtr OBJECT-TYPE
SYNTAX AdminState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The parameter that can be modified by the Operator in order to change the state of the
port. The value 'locked' is used to stop the port, the value 'unlocked' isued to start the
port."
::= { portEntry 7 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434.2.2.3.2.1.1 | portIndex | 0 | 0 | The index of the port generated by the Agent. Used in all other tables refering to ports. |
| 1.3.6.1.4.1.434.2.2.3.2.1.2 | portLanaNo | 0 | 0 | The LANA number of the port from the configuration, range: 1..48. |
| 1.3.6.1.4.1.434.2.2.3.2.1.3 | portName | 0 | 0 | The unique port name. |
| 1.3.6.1.4.1.434.2.2.3.2.1.4 | portCardLocation | 0 | 0 | The card reference. It should match the cardIndex (from the cardTable) of the card that this port belongs to. |
| 1.3.6.1.4.1.434.2.2.3.2.1.5 | portDescription | 0 | 0 | A general description of the port set by the Operator. |
| 1.3.6.1.4.1.434.2.2.3.2.1.6 | portOperState | 0 | 0 | The operational state of the port. |
| 1.3.6.1.4.1.434.2.2.3.2.1.8 | portOpenTime | 0 | 0 | The time the port was activated. |
| 1.3.6.1.4.1.434.2.2.3.2.1.9 | portProtocols | 0 | 0 | The mask indicating what is running on the port: lapb=0x1, sdlc=0x2, x25=0x4, frbs=0x8, dialer=0x100, ppp=0x1000. |
| 1.3.6.1.4.1.434.2.2.3.2.1.10 | portDialerType | 0 | 0 | The dialer type. |
| 1.3.6.1.4.1.434.2.2.3.2.1.11 | portActionState | 0 | 0 | The state of the operation performed on the port by the Agent as a result of setting the values to the portAdminStateCtr. The Ma… |
| 1.3.6.1.4.1.434.2.2.3.2.1.12 | portActionError | 0 | 0 | The error code after the unsuccessful operation. |