OID reference
1.3.6.1.4.1.4413.1.1.1.2.1.2.4
Get/Set the port no which should be used to open telnet sessions on switch. Port No is an integer value from 1 to 65535 and the given port should not be in use by any other service. The default value is 23.
Identification
{1 3 6 1 4 1 4413 1 1 1 2 1 2 4}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4413.1.1.1.2.1.2.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
agentTelnetMgmtPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the port no which should be used to open telnet sessions on switch.
Port No is an integer value from 1 to 65535 and the given port should not
be in use by any other service.
The default value is 23.
"
::= { agentTelnetConfigGroup 4 }agentTelnetMgmtPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the TCP port number that the telnet server listens to for incoming
requests. The port number is an integer value from 1 to 65535. Before setting
this object, check your system (e.g. using 'netstat') to make sure the desired
port number is not currently being used by any other service. The default
value for this object is 23.
Note that existing telnet login sessions are not affected by a change in value of
this object, although establishment of any new telnet sessions must use the new
port number."
::= { agentTelnetConfigGroup 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Get/Set the port no which should be used to open telnet sessions on switch. Port No is an integer value from 1 to 65535 and the given port should not be in use by any other service. The default value is 23.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Get/Set the TCP port number that the telnet server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 23. Note that existing telnet login sessions are not affected by a change in value of this object, although establishment of any new telnet sessions must use the new port number.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentTelnetMgmtPortNum
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentTelnetMgmtPortNum",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Get/Set the port no which should be used to open telnet sessions on switch. Port No is an integer value from 1 to 65535 and the given port should not be in use by any other service. The default value is 23. \"",
"::=",
"{",
"agentTelnetConfigGroup",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Get/Set the port no which should be used to open telnet sessions on switch. Port No is an integer value from 1 to 65535 and the given port should not be in use by any other service. The default value is 23."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'TruthValue', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['fastPath', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Status in source: current.
Names: agentTelnetMgmtPortNum
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentTelnetMgmtPortNum",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Get/Set the TCP port number that the telnet server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 23. Note that existing telnet login sessions are not affected by a change in value of this object, although establishment of any new telnet sessions must use the new port number.\"",
"::=",
"{",
"agentTelnetConfigGroup",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Get/Set the TCP port number that the telnet server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 23. Note that existing telnet login sessions are not affected by a change in value of this object, although establishment of any new telnet sessions must use the new port number."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: EdgeSwitch-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: EdgeSwitch-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Vendor MIB copy from the Netdisco archive.
Module: EdgeSwitch-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.1.1.1.2.1.2.1 | agentTelnetLoginTimeout | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.1.2.2 | agentTelnetMaxSessions | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.1.2.3 | agentTelnetAllowNewMode | 0 | 0 |