OID reference

cmIpProvisioningMode

1.3.6.1.4.1.4413.2.2.2.1.2.1.9

Description

The value of this object determines the mode used by the CM for IP provisioning. If set to the default value of mdd(0), the CM will comply with the DOCSIS 3.0 specification and use the mode identified in the IP provisioning mode field of the MDD message received from the CMTS. If set to any other value, the CM will ig…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.4413.2.2.2.1.2.1 (cmMgmtBase)
Node code
9
Node name
cmIpProvisioningMode
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.4413.2.2.2.1.2.1.9
URN notation
urn:oid:1.3.6.1.4.1.4413.2.2.2.1.2.1.9
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 4413 2 2 2 1 2 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) broadcom(4413) cableData(2) cableDataMgmt(2) cableDataMgmtMIB(2) cableDataMgmtMIBObjects(1) cablemodemMgmt(2) cmMgmtBase(1) cmIpProvisioningMode(9)}
OID-IRI notation
  • /1/3/6/1/4/1/4413/2/2/2/1/2/1/9
  • /ISO/Identified-Organization/6/1/4/1/4413/2/2/2/1/2/1/9
  • /ISO/3/6/1/4/1/4413/2/2/2/1/2/1/9
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/identified-organization/dod/internet/private/enterprises/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/identified-organization/dod/internet/private/vendor-objects/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/org/dod/internet/private/enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/org/dod/internet/private/enterprises/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/org/dod/internet/private/ldap-enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/org/dod/internet/private/vendor-objects/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-identified-organization/dod/internet/private/enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-identified-organization/dod/internet/private/enterprises/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-organization/dod/internet/private/enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-organization/dod/internet/private/enterprises/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode
  • /iso/iso-organization/dod/internet/private/vendor-objects/broadcom/cableData/cableDataMgmt/cableDataMgmtMIB/cableDataMgmtMIBObjects/cablemodemMgmt/cmMgmtBase/cmIpProvisioningMode

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
mdd

Enumerated values

ValueName
0mdd
1ipV4Only
2ipV6Only
3apm
4dualStack

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.4413.2.2.2.1.2.1.9.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

cmIpProvisioningMode OBJECT-TYPE
    SYNTAX      INTEGER {
                mdd(0),
                ipV4Only(1),
                ipV6Only(2),
                apm(3),
                dualStack(4)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of this object determines the mode used by the CM for IP 
         provisioning.  
        
         If set to the default value of mdd(0), the CM will comply with the 
         DOCSIS 3.0 specification and use the mode identified in the IP 
         provisioning mode field of the MDD message received from the CMTS.
        
         If set to any other value, the CM will ignore the IP provisioning mode
         field of the MDD message and use the mode specified by this object
         instead.
         
         If the DOCSIS config file contains a TLV which changes the value of 
         this object from its current value, the CM will abandon its current IP 
         settings and restart the IP provisioning and registration process using 
         the new mode.  Setting this object using SNMP does not cause a 
         restart; in the case of an SNMP set, the new mode will take effect 
         the next time the CM registers with a CMTS.
         
         Note that this object may also be used to invoke IPv6 or dual-stack 
         operation when using a pre-DOCSIS 3.0 CMTS, provided the network 
         hosting the CM is IPv6 capable.
         
         Further note that a CM which does not support IPv6 will always report
         ipV4Only(1) for this object, and an attempt to set the object to any
         other value will be rejected with an inconsistentValue error.
         
         If this object is set to a value which is incompatible with the 
         capabilities of the associated CMTS or network, then IP provisioning 
         may fail.  This setting is persistent across reboots."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification 
         CM-SP-MULPIv3.0-I10-090529, sections 6.4.28.1.5 'IP Initialization 
         Parameters TLV' and 10.2.5 'Establishing IP Connectivity'"
    DEFVAL { mdd }
    ::= { cmMgmtBase 9 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The value of this object determines the mode used by the CM for IP provisioning. If set to the default value of mdd(0), the CM will comply with the DOCSIS 3.0 specification and use the mode identified in the IP provisioning mode field of the MDD message received from the CMTS. If set to any other value, the CM will ignore the IP provisioning mode field of the MDD message and use the mode specified by this object instead. If the DOCSIS config file contains a TLV which changes the value of this object from its current value, the CM will abandon its current IP settings and restart the IP provisioning and registration process using the new mode. Setting this object using SNMP does not cause a restart; in the case of an SNMP set, the new mode will take effect the next time the CM registers with a CMTS. Note that this object may also be used to invoke IPv6 or dual-stack operation when using a pre-DOCSIS 3.0 CMTS, provided the network hosting the CM is IPv6 capable. Further note that a CM which does not support IPv6 will always report ipV4Only(1) for this object, and an attempt to set the object to any other value will be rejected with an inconsistentValue error. If this object is set to a value which is incompatible with the capabilities of the associated CMTS or network, then IP provisioning may fail. This setting is persistent across reboots.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

cmIpProvisioningMode · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: cmIpProvisioningMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "cmIpProvisioningMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "mdd",
    "(",
    "0",
    ")",
    ",",
    "ipV4Only",
    "(",
    "1",
    ")",
    ",",
    "ipV6Only",
    "(",
    "2",
    ")",
    ",",
    "apm",
    "(",
    "3",
    ")",
    ",",
    "dualStack",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of this object determines the mode used by the CM for IP provisioning. If set to the default value of mdd(0), the CM will comply with the DOCSIS 3.0 specification and use the mode identified in the IP provisioning mode field of the MDD message received from the CMTS. If set to any other value, the CM will ignore the IP provisioning mode field of the MDD message and use the mode specified by this object instead. If the DOCSIS config file contains a TLV which changes the value of this object from its current value, the CM will abandon its current IP settings and restart the IP provisioning and registration process using the new mode. Setting this object using SNMP does not cause a restart; in the case of an SNMP set, the new mode will take effect the next time the CM registers with a CMTS. Note that this object may also be used to invoke IPv6 or dual-stack operation when using a pre-DOCSIS 3.0 CMTS, provided the network hosting the CM is IPv6 capable. Further note that a CM which does not support IPv6 will always report ipV4Only(1) for this object, and an attempt to set the object to any other value will be rejected with an inconsistentValue error. If this object is set to a value which is incompatible with the capabilities of the associated CMTS or network, then IP provisioning may fail. This setting is persistent across reboots.\"",
    "REFERENCE",
    "\"DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I10-090529, sections 6.4.28.1.5 'IP Initialization Parameters TLV' and 10.2.5 'Establishing IP Connectivity'\"",
    "DEFVAL",
    "{",
    "mdd",
    "}",
    "::=",
    "{",
    "cmMgmtBase",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "mdd",
            0
          ],
          [
            "ipV4Only",
            1
          ],
          [
            "ipV6Only",
            2
          ],
          [
            "apm",
            3
          ],
          [
            "dualStack",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of this object determines the mode used by the CM for IP provisioning. If set to the default value of mdd(0), the CM will comply with the DOCSIS 3.0 specification and use the mode identified in the IP provisioning mode field of the MDD message received from the CMTS. If set to any other value, the CM will ignore the IP provisioning mode field of the MDD message and use the mode specified by this object instead. If the DOCSIS config file contains a TLV which changes the value of this object from its current value, the CM will abandon its current IP settings and restart the IP provisioning and registration process using the new mode. Setting this object using SNMP does not cause a restart; in the case of an SNMP set, the new mode will take effect the next time the CM registers with a CMTS. Note that this object may also be used to invoke IPv6 or dual-stack operation when using a pre-DOCSIS 3.0 CMTS, provided the network hosting the CM is IPv6 capable. Further note that a CM which does not support IPv6 will always report ipV4Only(1) for this object, and an attempt to set the object to any other value will be rejected with an inconsistentValue error. If this object is set to a value which is incompatible with the capabilities of the associated CMTS or network, then IP provisioning may fail. This setting is persistent across reboots."
    ],
    [
      "REFERENCE",
      "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I10-090529, sections 6.4.28.1.5 'IP Initialization Parameters TLV' and 10.2.5 'Establishing IP Connectivity'"
    ],
    null,
    null,
    [
      "DEFVAL",
      "mdd"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.4413)

Fan Frankie

Siblings (12)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.4413.2.2.2.1.2.1.1 cmNumLLCFiltersSupported00
1.3.6.1.4.1.4413.2.2.2.1.2.1.2 cmNumIpFiltersSupported00
1.3.6.1.4.1.4413.2.2.2.1.2.1.3 cmMiniFirewallEnable00
1.3.6.1.4.1.4413.2.2.2.1.2.1.4 cmDsdExtendedRetryEnable00
1.3.6.1.4.1.4413.2.2.2.1.2.1.5 cmCpeInterface00
1.3.6.1.4.1.4413.2.2.2.1.2.1.6 cmResetFactoryDefaults00
1.3.6.1.4.1.4413.2.2.2.1.2.1.7 cmTodRefreshInterval00
1.3.6.1.4.1.4413.2.2.2.1.2.1.8 cmDownstreamChannelInfoTable15
1.3.6.1.4.1.4413.2.2.2.1.2.1.10 cmServiceQueueTable14
1.3.6.1.4.1.4413.2.2.2.1.2.1.11 cmForwardingHwAssistEnable00
1.3.6.1.4.1.4413.2.2.2.1.2.1.12 cmOverrideUcdMaxBurst00
1.3.6.1.4.1.4413.2.2.2.1.2.1.13 cmExtendedUsTxPowerCapability00