Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsPnmCmDsConstDispModOrderOffset",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"10",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute specifies an offset from the lowest order modulation for the data subcarriers in any of the profiles in the downstream channel. If the lowest order modulation order that the CM was receiving was 1024-QAM and the ModulationOrderOffset was zero, then the CM would capture the soft decision samples for all of the subcarriers which were using 1024-QAM modulation order. If the ModulationOrderOffset was 1, then the CM would capture the soft decision samples for all of the subcarriers using the next highest modulation order in use for the profiles in the downstream channel. This value can only be changed while a test is not in progress. An attempt to set this value while the value of 'docsPnmCmDsConstDispMeasStatus' is 'busy' will return 'inconsistentValue'. \"",
"REFERENCE",
"\"DOCSIS 3.1 Cable Modem Operations Support System Interface Specification CM-SP-CM-OSSIv3.1, PNM section.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"docsPnmCmDsConstDispMeasEntry",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
10
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute specifies an offset from the lowest order modulation for the data subcarriers in any of the profiles in the downstream channel. If the lowest order modulation order that the CM was receiving was 1024-QAM and the ModulationOrderOffset was zero, then the CM would capture the soft decision samples for all of the subcarriers which were using 1024-QAM modulation order. If the ModulationOrderOffset was 1, then the CM would capture the soft decision samples for all of the subcarriers using the next highest modulation order in use for the profiles in the downstream channel. This value can only be changed while a test is not in progress. An attempt to set this value while the value of 'docsPnmCmDsConstDispMeasStatus' is 'busy' will return 'inconsistentValue'."
],
[
"REFERENCE",
"DOCSIS 3.1 Cable Modem Operations Support System Interface Specification CM-SP-CM-OSSIv3.1, PNM section."
],
null,
null,
[
"DEFVAL",
0
]
]
}